Answer:
Explanation:The remaining air (air that does not descend at 30 degrees North or South latitude) continues toward the poles and is known as the westerly winds, or westerlies
Plants stored carbon in their tissues to use as energy and plants took in carbon dioxide and released oxygen through photosynthesis. Thus, the correct option is A and D.
<h3>
What is carbon cycle?</h3>
The carbon cycle is the ongoing process through which carbon atoms move back and forth between the atmosphere and the Earth. The amount of carbon in this system does not fluctuate because our planet and its atmosphere are a closed environment. The location of the carbon, whether it is on Earth or in the atmosphere, is continually changing.
Plants use photosynthesis to transport carbon from the atmosphere into the biosphere and move it up the food chain. They make sugar molecules by chemically combining carbon dioxide with oxygen and hydrogen from water using solar energy.
For more information regarding carbon cycle, visit:
brainly.com/question/12023466
#SPJ1
The requirement of energy makes an organism’s cell make up different from the cell makeup of an inanimate object.
All living things require energy from food in order to function properly. The energy from food is used through the metabolic processes.
Sound quality can be divided into amplitude, timbre and pitch. If there’s an impedance mismatch between your two devices connected to the single output, you could have a large mismatch between the levels arriving at each device. If the difference is large enough, one device may have distorted or inaudible audio.
To avoid this, you should ensure that both devices connected to the split signal are similar - such as 2 pairs of headphones, 2 recorder inputs, and so on. When you place 2 devices with wildly differing load impedances on a splitter is when you’ll encounter problems - such as headphones on one split and a guitar amp input on the other.
To get around this, you can use either a distribution amplifier (D.A.) or a transformer balanced/isolated splitter - which will work over a larger range of load impedances, typically. Depends on the quality of the splitter and the exact signal path. If you’re using the splitter to hook two things into one input, and you’re using quality connectors, you probably won’t lose much quality. There can be an increase in impedance of the cable due to the imperfect continuity of the physical connection, however with unbalanced line-level signals, impedance at both ends of the chain tends to be orders of magnitude higher than the connection will create, so one split will be barely noticeable. So too, the noise increase from the additional length of cable.
Now, one source into two inputs, that will by basic math and physics result in a 3dB drop in signal strength, which will reduce SNR by about that much. By splitting the signal path between two inputs of equal impedance, half of the wattage is being consumed by one input and half by the other (the equation changes if the inputs have significantly different impedances). So each input gets half the wattage produced by the source to drive the signal on the input cable, and in decibel terms a halving of power is a 3dB reduction. Significant, until you just turn the gain back up. The “noise floor” will be raised by however much noise is inherent in the signal path between the split and the output of the gain stage; for pro audio this is usually infinitesimal, but consumer audio can have some really noisy electronics, both for lower cost and because you’re not expected to be “re-amping” signals several times between the source and output.
