All categories

3 years ago

Should the transmission angle for the planar four-bar linkage be close to 0? Explain?

Engineering

1 answer:

AleksandrR [38]3 years ago

8 0

Answer:

The planer four bar linkage is the type of closed chain linkage and it is also simple movable linkage system. It is also known as "four-bar" linkage.

In this type of four bar linkage the re-volute joints are mainly designed to handle the transverse load easily as compared to load acting on the length of the link.

The planer four bar linkage are mainly constructed when the four types of links are mainly constructed in the loop format by using the joints. These joints are basically configure so that the links can easily move in the parallel plane system.

You might be interested in

What is the difference between absorbed wavelengths and reflected wavelengths?

JulijaS [17]

A reflected wavelength of light is detected by the detector and is decoded as a logic one; absorbed or transmitted wavelengths are not detected, there absence being decoded as a logic zero.

6 0

2 years ago

A series circuit has 4 identical lamps. The potential difference of the energy source is 60V. The total resistance of the lamps

Alexxx [7]

Answer:

$I=3A$

Explanation:

From the question we are told that:

Number of lamps $N=4$

Potential difference $V=60v$

Total Resistance of the lamp is $R= 20ohms$

Generally the equation for Current I is mathematically given by

$I=\frac{V}{R}$

$I=\frac{60}{20}$

$I=3A$

8 0

3 years ago

Which of the following is not caused by alcohol?

Brrunno [24]

Answer:

Inhibited comprehension

4 0

3 years ago

Read 2 more answers

16. Which polymers are recyclable?

MrRissso [65]

Answer:

Number 2 is HDPE, or High-Density Polyethylene. It is most commonly found in plastic bags, oil and detergent bottles, and toys. It is one of the simplest polymers to recycle. It is broken down into flakes, decontaminated and then reused for pipes, flower pots or reused as (non-food) bottles.

8 0

3 years ago

The minimum fresh air requirement of a residential building is specified to be 0.35 air changes per hour (ASHRAE, Standard 62, 1

Thepotemich [5.8K]

Answer:

a) The flow capacity of the fan is 3150 L/min

d) the minimum diameter is 0.11 m

Explanation:

given data:

A = area of residence = 200 m²

h = height of building = 2.7 m

Percentage of air that must be replaced by fresh air is 35%