If the power factor is corrected to 0.95 lagging, keeping the receiving end MVA constant, what will be the new voltage regulatio
1 answer:
You might be interested in
Answer:
The system can be described by a convolution
Explanation:
Thinking process:
If we consider a discrete input to a linear time-invariant system, then the system will be periodic with respect to the period, say N. This therefore, means that the output must also be periodic. The proof is as follows:
The LTI system can be written for the system where:
y (n+N) = ∑
= ∑
From the proof, it turns out that y(y + N) = y(n) for any value of n, then the output will be the periodic with the period N.
Answer:
r=0.31
Ф=18.03°
Explanation:
Given that
Diameter of bar before cutting = 75 mm
Diameter of bar after cutting = 73 mm
Mean diameter of bar d= (75+73)/2=74 mm
Mean length of uncut chip = πd
Mean length of uncut chip = π x 74 =232.45 mm
So cutting ratio r
r=0.31
So the cutting ratio is 0.31.
As we know that shear angle given as
Now by putting the values
\
Ф=18.03°
So the shear angle is 18.03°.