Answer:
40 V
Explanation:
I will assume that the resistors are
100 and 3900 and 1000 OHMS <=====(NOT W)
In series , the resistances add together 100 + 3900 + 1000 = 5000 ohms total
V = IR
I = V / R so the total current will be 200 v / 5000 ohms = .04 amps
this is the current through all of the resistors
so for the 1000 ohm resistor V = IR .04 (1000) = 40 V
The work W done by the electric field in moving the proton is equal to the difference in electric potential energy of the proton between its initial location and its final location, therefore:

where q is the charge of the proton,

, with

being the elementary charge, and

and

are the initial and final voltage.
Substituting, we get (in electronvolts):

and in Joule:
If she has a choice and the wiring details are stated on the packaging,
then Janelle should look for lights that are wired in parallel within the
string, and she should avoid lights that are wired in series within the string.
If a single light in a parallel string fails, then only that one goes out.
The rest of the lights in the string continue to shimmer and glimmer.
If a single light in a series string fails, then ALL of the lights in that string
go out, and it's a substantial engineering challenge to determine which light
actually failed.
Answer:
They are the same
Explanation:
Electromagnetic waves consist of perpendicular oscillations of electric and magnetic field, which oscillate perpendicularly to the direction of motion of the wave (transverse wave). One property of the electromagnetic waves is that they travel in a vacuum always at the same speed, called speed of light:

Electromagnetic waves are classified into 7 different types according to their frequency; from highest to lowest frequency, we have:
Gamma rays
X-rays
Ultraviolet
Visible light
Infrared
Microwaves
Radio waves
We see that both visible light and gamma rays are electromagnetic waves, so they both travel in a vacuum at the same speed, the speed of light.