Answer:
3×10⁵ N/m²
Explanation:
From the question given above, the following data were obtained:
Force (F) = 450 N
Area (A) = 0.0015 m²
Pressure (P) =?
Pressure is simply defined as the force per unit area. Mathematically, it is expressed as:
Pressure (P) = Force (F) / Area (A)
P = F/A
With the above formula, we can obtain the pressure exerted by the man on the ground. This can be obtained as follow:
Force (F) = 450 N
Area (A) = 0.0015 m²
Pressure (P) =?
P = F/A
P = 450 /0.0015
P = 3×10⁵ N/m²
Thus, the pressure exerted by the man on the ground is 3×10⁵ N/m².
The molar mass of a, b and c at STP is calculated as below
At STP T is always= 273 Kelvin and ,P= 1.0 atm
by use of ideal gas equation that is PV =nRT
n(number of moles) = mass/molar mass therefore replace n in the ideal gas equation
that is Pv = (mass/molar mass)RT
multiply both side by molar mass and then divide by Pv to make molar mass the subject of the formula
that is molar mass = (mass x RT)/ PV
density is always = mass/volume
therefore by replacing mass/volume in the equation by density the equation
molar mass=( density xRT)/P where R = 0.082 L.atm/mol.K
the molar mass for a
= (1.25 g/l x0.082 L.atm/mol.k x273k)/1.0atm = 28g/mol
the molar mass of b
=(2.86g/l x0.082L.atm/mol.k x273 k) /1.0 atm = 64 g/mol
the molar mass of c
=0.714g/l x0.082 L.atm/mol.K x273 K) 1.0atm= 16 g/mol
therefore the
gas a is nitrogen N2 since 14 x2= 28 g/mol
gas b =SO2 since 32 +(16x2)= 64g/mol
gas c = methaneCH4 since 12+(1x4) = 16 g/mol
Aluminum is 26.982 grams per mole, so 26.982/19.9 will give you the moles 1.3558794
High temp and low pressure
Answer:
#1
The temperature that this happens is called the freezing point and is the same temperature as the melting point. As more energy is put into the system, the water heats up, the molecules begin moving faster and faster until there is finally enough energy in the system to totally overcome the attractive forces.
Explanation:
#2
Heating a liquid increases the speed of the molecules. An increase in the speed of the molecules competes with the attraction between molecules and causes molecules to move a little further apart. ... A decrease in the speed of the molecules allows the attractions between molecules to bring them a little closer together.
