Answer:
<em>Aim at the base of the fire and use short bursts until the fire is out.</em>
<em></em>
Explanation:
Fire extinguishers use CO2 (Carbondioxide) as the extinguishing agent. This is because CO2 is denser than air, and does not support combustion.
Aiming at the base of the fire causes the CO2 to fall on the base of the fire, where the source of the fire is, trapping it, and preventing it from further reacting with air in a combustion reaction. Also, the short burst creates a strong wind that forces the flame to blow out.
Complete Question
The complete question is shown on the uploaded image
Answer:
The tension on the shank is 
Explanation:
From the question we are told that
The strain on the strain on the head is 
The contact area is
Looking at the first diagram
At 600 MPa of stress
The strain is 
At 450 MPa of stress
The strain is 
To find the stress at
we use the interpolation method

Substituting values



Generally the force on each head is mathematically represented as

Substituting values


Now the tension on the bolt shank is as a result of the force on the 6 head which is mathematically evaluated as



Answer:
3.0 x10^-3 J
Explanation:
The potential energy of a spring is given by PE = (0.5)k*x^2
Where
K: Spring Constant = 60 N/m
x: displacement of the spring from its equilibrium position = 1cm = 0.01m
Then PE = 0.5(60)(.01)^2 = 0.003J = 3.0 x10^-3 J
It is true that Gustav Theodor Fechner was the finder of <span>psychophysics. </span>