Same question idea but different values... I hope I helped you... Don't forget to put a heart mark
Answer:
35psig
Explanation:
Pressure is a force that acts on a surface area. The psig measure the pressure pounds per square inch gauge. It measure the difference in pressure between supply tank and outside air. This pressure is relative to atmospheric pressure. When charging an R-410A system, the vapor pressure should be at least 35 psig before switching to liquid charging.
Answer:a) recovery factor = 53.3% ,bi) volume of oil per acre-ft = 11090.64bbl/acre-ft
bii) bulk volume of the reservoir in acre-ft = 1000 acre-ft
c) 62214.74 cubic feet
Explanation: a) recovery factor is the percentage amount of oil that can recovered from a reservoir, it is the oil produced divided by oil initially in place
Recovery factor= 1 - (Soi/1-Swi)
= 1 - (0.35/1-0.25)
= 0.533 × 100%
= 53.3%
bi) volume of oil which may be recovered per acre-ft = 7758.porosity.(1- Swi-Soi)
= 7758 x 0.2 x (1-0.25-0.35)
= 620.64 bbl/acre-ft
bii) bulk volume of the reservoir in acre-ft= Area x thickness
= 100 acres x 10 ft
= 1000 acre-ft
c) total volume of oil in cubic feet
since we have gotten volume as 1000 acre-ft we simply multiply it by the volume of oil gotten in answer bi)
= 1000 acre-ft x 620.64 bbl/ acre-ft
= 620640bbl
So we convert from barrel(bbl) to cubic feet, and 1 barrel is equal to 5.609 cubic feet, so to convert the answer from barrel to cubic feet we multiply the answer 620640 bbl by 5.609
= 620640 bbl x 5.609
= 3481580.711 cubic feet
Answer: Incoherent question
Explanation: This is an act of plagiarism at subjecting the tutor to unnecessary stress at answering the purported question.
