How does friction affect energy transformation

2 answers:

8 0

Friction can be very hot but if the weather is cold you can use the friction that they can affect the en energy they will be so hot

Westkost [7]3 years ago

4 0

The friction can be used as a stopper for the electricity so it can slow

or it can increace speed

You might be interested in

What mass of butane in grams is necessary to produce 1.5×103 kj of heat what mass of co2 is produced?

kari74 [83]

The heat of reaction (i.e. combustion) of butane ( $C_{4} H_{10}$ ) when reacted with oxygen ( $O_{2}$ )  is -2658 kJ/mol butane, and the chemical reaction is given by:

$C_{4} H_{10}$ + $\frac{13}{2} O_{2}$ ---> $4 CO_{2}$ + $5 H_{2}O$

The mass of butane required in the reaction is based on the heat produced by the reaction, which is given to be -1,500 kJ. The minus sign is added because the reaction releases heat (exothermic), which means that the products are in a "lower energy state" than the reactants.

Dividing this with the heat of reaction per mole of butane reacted would give the number of moles butane required. Then, multiplying the answer with the molar mass of butane which is 58 grams/mole, will give the mass of butane required.

Moles of butane = [(-1,500 kJ)/(-2658 kJ/mol butane)]
Moles of butane = 0.5643 moles butane

Mass of butane  = 0.5643 moles butane * 58 grams/mol butane
Mass of butane = 32.73 grams butane

The mass of carbon dioxide ( $CO_{2}$ ) can be determined by multiplying the moles of butane ( $C_{4} H_{10}$ ) with the mole ratio of ( $CO_{2}$ ) produced to the ( $C_{4} H_{10}$ ) reacted, and then with the molar mass of ( $CO_{2}$ ), which is 44 grams/mole.

Mass of carbon dioxide produced
= 0.5643 moles butane * [4 moles $CO_{2}$ / 1 mole $C_{4} H_{10}$ ] * 44 grams/mole $CO_{2}$

Mass of carbon dioxide produced
= 99.32 grams $CO_{2}$

Thus, the mass of butane required is 32.73 grams, and the mass of carbon dioxide produced from the reaction of this amount of butane is 99.32 grams.

4 0

3 years ago

Read 2 more answers

Practice Problem: True Stress and Strain A cylindrical specimen of a metal alloy 49.7 mm long and 9.72 mm in diameter is stresse

amm1812

Answer:

The true stress required = 379 MPa

Explanation:

True Stress is the ratio of the internal resistive force to the instantaneous cross-sectional area of the specimen. True Strain is the natural log to the extended length after which load applied to the original length. The cold working stress – strain curve relation is as follows,

σ(t) = K (ε(t))ⁿ, σ(t) is the true stress, ε(t) is the true strain, K is the strength coefficient and n is the strain hardening exponent

True strain is given by

Epsilon t =㏑ (l/l₀)

Substitute㏑(l/l₀) for ε(t)

σ(t) = K(㏑(l/l₀))ⁿ

Given values l₀ = 49.7mm, l =51.7mm , n =0.2 , σ(t) =379Mpa

379 x 10⁶ = K (㏑(51.7/49.7))^0.2

K = 379 x 10⁶/(㏑(51.7/49.7))^0.2

K = 723.48 MPa

Knowing the constant value would be same as the same material is being used in the second test, we can find out the true stress using the above formula replacing the value of the constant.

σ(t) = K(㏑(l/l₀))ⁿ

l₀ = 49.7mm, l = 51.7mm, n = 0.2, K = 723.48Mpa

σ(t) = 723.48 x 106 x (㏑(51.7/49.7))^0.2

σ(t) = 379 MPa

The true stress necessary to plastically elongate the specimen is 379 MPa.

6 0

3 years ago

Read 2 more answers

What drives this process

m_a_m_a [10]

Answer:

Explanation: