All categories

3 years ago

At what distance from a point charge of 8.0 μC would the electrical potential be 4.8 × 104 V? (ke = 8.99 × 109 N⋅m2/C2)

Engineering

1 answer:

kotegsom [21]3 years ago

5 0

Answer:

1.498 m

Explanation:

Electric potential due to a point charge V = K × Q / r

4.8 × 10 ⁴ V = 8.99 × 10⁹ N.m²/C² × 8 × 10⁻⁶ C / r

r = 8.99 × 10⁹ N.m²/C² × 8 × 10⁻⁶ C / 4.8 × 10 ⁴ V = 1.498 m

You might be interested in

You are the project manager assigned to construct a new 10-story office building. You are trying to estimate the costs for this

Semmy [17]

Answer:

Bottom-up Estimation

Explanation:

Bottom-up estimation is a type of project cost estimation that considers the cost of individual project activities and finally sums them up or finds the aggregates. The summation gives an idea of what the entire project will cost.

This is an effective way of estimating the cost of a project as it evaluates the costs on a wholistic basis. It also considers the tiniest details during the estimation process. The process moves from the simpler details to the more complicated details.

8 0

3 years ago

Nec ________ covers selection of time-delay fuses for motor- overload protection.

Murljashka [212]

Nec Article 430 covers selection of time-delay fuses for motor- overload protection.

<h3>What article in the NEC covers motor overloads?</h3>

Article 430 that is found in National Electrical Code (NEC) is known to be state as “Motors, Motor Circuits and Controllers.” .

Note that the article tells that it covers areas such as motors, motor branch-circuit as well as feeder conductors, motor branch-circuit and others.

Therefore, Nec Article 430 covers selection of time-delay fuses for motor- overload protection.

Learn more about motor- overload from

brainly.com/question/20738481

#SPJ1

6 0

1 year ago

A certain solar energy collector produces a maximum temperature of 100°C. The energy is used in a cyclic heat engine that operat

Gwar [14]

Answer:

$\eta _{max} = 0.2413 = 24.13%$

$\eta' _{max} = 0.5061 = 50.61%$

Given:

$T_{1max} = 100^{\circ} = 273 + 100 = 373 K$

operating temperature of heat engine, $T_{2} = 10^{\circ} = 273 + 10 = 283 K$

$T_{3max} = 300^{\circ} = 273 + 300 = 573 K$

Solution:

For a reversible cycle, maximum efficiency, $\eta _{max}$ is given by:

$\eta _{max} = 1 - \frac{T_{2}}{T_{1max}}$

$\eta _{max} = 1 - \frac{283}{373} = 0.24$

$\eta _{max} = 0.2413 = 24.13%$

Now, on re designing collector, maximum temperature, $T_{3max}$ changes to $300^{\circ}$ , so, the new maximum efficiency, $\eta' _{max}$ is given by:

$\eta' _{max} = 1 - \frac{T_{2}}{T_{3max}}$

$\eta _{max} = 1 - \frac{283}{573} = 0.5061$

$\eta _{max} = 0.5061 = 50.61%$

4 0

4 years ago

The hydrofoil boat has an A-36 steel propeller shaft that is 100 ft long. It is connected to an in-line diesel engine that deliv

Nataliya [291]

The question is incomplete. The complete question is :

The hydrofoil boat has an A-36 steel propeller shaft that is 100 ft long. It is connected to an in-line diesel engine that delivers a maximum power of 2590 hp and causes the shaft to rotate at 1700 rpm . If the outer diameter of the shaft is 8 in. and the wall thickness is $\frac{3}{8}$ in.

A) Determine the maximum shear stress developed in the shaft.

$\tau_{max}$ = ?

B) Also, what is the "wind up," or angle of twist in the shaft at full power?

$\phi$ = ?

Solution :

Given :

Angular speed, ω = 1700 rpm

$= 1700 \frac{\text{rev}}{\text{min}}\left(\frac{2 \pi \text{ rad}}{\text{rev}}\right) \frac{1 \text{ min}}{60 \ \text{s}}$

$= 56.67 \pi \text{ rad/s}$

Power $= 2590 \text{ hp} \left( \frac{550 \text{ ft. lb/s}}{1 \text{ hp}}\right)$

= 1424500 ft. lb/s

Torque, $T = \frac{P}{\omega}$

$=\frac{1424500}{56.67 \pi}$

= 8001.27 lb.ft

A). Therefore, maximum shear stress is given by :

Applying the torsion formula

$\tau_{max} = \frac{T_c}{J}$

$=\frac{8001.27 \times 12 \times 4}{\frac{\pi}{2}\left(4^2 - 3.625^4 \right)}$

= 2.93 ksi

B). Angle of twist :

$\phi = \frac{TL}{JG}$

$=\frac{8001.27 \times 12 \times 100 \times 12}{\frac{\pi}{2}\left(4^4 - 3.625^4\right) \times 11 \times 10^3}$

= 0.08002 rad

= 4.58°

6 0

3 years ago

When -iron is subjected to an atmosphere of hydrogen gas, the concentration of hydrogen in the iron, CH (in weight percent), is

djyliett [7]

Answer:

See attachments for step by step explanation towards getting answer.

Explanation:

Given that;

College Engineering 10+5 pts

When -iron is subjected to an atmosphere of hydrogen gas, the concentration of hydrogen in the iron, CH (in weight percent), is a function of hydrogen pressure, (in MPa), and absolute pH2temperature (T) according to(5.14)Furthermore, the values of D0 and Qd for this diffusion system are 1.4  10-7 m2/s and 13,400 J/mol, respectively. Consider a thin iron membrane 1 mm thick that is at 250C. Compute the diffusion flux through this membrane if the hydrogen pressure on one side of the membrane is 0.15 MPa (1.48 atm), and on the other side 7.5 MPa (74 atm).

See attachlent for complete solving.

6 0

3 years ago