Answer:
B a lever because it can move up and down
Explanation:
Explanation:
Step1
Lehr is the long open or closed insulated space for glass manufacturing. Lehr must be large enough to keep the cooling of glass uniform. The function of Lehr is the same as an annealing process in metallurgy.
Step2
Lehr decrease the cooling and temperature variation in glass production. Uneven temperature creates the internal stress in the glass. Lehr reduces the internal stress in the glass product. So, the main purpose of the Lehr is to reduce the internal stress and keep the cooling uniform.
Answer:
Yes a router can be used to cut right through wood and sometimes it makes sense to do so. It leaves nice clean edges, can cut sharp curves and can follow a template
Explanation:
hope thats right
Answer:
A Lengths
Explanation:
you make a model to show an object too large to test and too expensive to test
Answer:
All 3 principal stress
1. 56.301mpa
2. 28.07mpa
3. 0mpa
Maximum shear stress = 14.116mpa
Explanation:
di = 75 = 0.075
wall thickness = 0.1 = 0.0001
internal pressure pi = 150 kpa = 150 x 10³
torque t = 100 Nm
finding all values
∂1 = 150x10³x0.075/2x0,0001
= 0.5625 = 56.25mpa
∂2 = 150x10³x75/4x0.1
= 28.12mpa
T = 16x100/(πx75x10³)²
∂1,2 = 1/2[(56.25+28.12) ± √(56.25-28.12)² + 4(1.207)²]
= 1/2[84.37±√791.2969+5.827396]
= 1/2[84.37±28.33]
∂1 = 1/2[84.37+28.33]
= 56.301mpa
∂2 = 1/2[84.37-28.33]
= 28.07mpa
This is a 2 d diagram donut is analyzed in 2 direction.
So ∂3 = 0mpa
∂max = 56.301-28.07/2
= 14.116mpa
