Answer:
D.
Explanation:
In combinational circuits, the current output values are always the same for the same set of input values, regardless the previous values.
We say that combinational circuits have no memory, or that the circuit has no feedback from the outputs.
For sequential circuits, on the contrary, the current output values are not based in the current input values only, but on the previous output values as well.
So, the fact of having a defined set of input values at a given moment, doesn't guarantee which the output values will be.
We say that sequential circuits have memory, or that they have feedback from the outputs.
Examples of these type of circuits are R-S, J-K, D or T flip-flops.
Can u plz give me a picture
Answer:
a. 118.20.210.254
Explanation:
Here are the few characteristics of Class A:
First bit of the first octet of class A is 0.
This class has 8 bits for network and 24 bits for hosts.
The default sub-net mask for class A IP address is 255.0.0.0
Lets see if the first bit of first octet of 118.20.210.254 address is 0.
118 in binary (8 bits) can be represented as : 1110110
To complete 8 bits add a 0 to the left.
01110110
First bit of the first octet of class A is 0 So this is class A address.
For option b the first octet is : 183 in the form of bits = 10110111 So it is not class A address
For option c the first octet is 215 in the form of bits = 11010111 So it is not class A address
For option d the first octet is 255 in the form of bits = 11111111. The first bit of first octet is not 0 so it is also not class A address.
I think it can't.
The one that get high needs met rating are the pages that satisfy the user's search. The search engine result page that shown at the top of the result doesn't necessarily fulfil this criteria
hope this helps
Answer:
The solution code is written in Python:
- COST_PER_500MI = 1.1
-
- weight = float(input("Enter weight of package: "))
- total_cost = weight * COST_PER_500MI
- print("The shipping charges is $" + str(round(total_cost,2)))
Explanation:
Based on the information given in the question, we presume the cost per 500 miles is $1.10 per pound ($2.20 / 2 pound).
Create a variable COST_PER_500MI to hold the value of cost per 500 miles (Line 1). Next, prompt user input the weight and assign it to variable weight (Line 3). Calculate the shipping charge and display it using print function (Line 4-5).
