All categories

3 years ago

Under maximum power transfer conditions, the operating efficiency of a system is 100%. (a) True (b) False

Engineering

1 answer:

Free_Kalibri [48]3 years ago

6 0

Answer:

False

Explanation:

Under maximum power transfer the operating efficiency of the system is only 50% so the given statement is false statement

Maximum power is transferd only when the load resistance is equal to the source resistance the maximum power transfer is given by $\frac{V_{TH}^2}{4R_{TH}}$ where $V_{TH}$ is Thevenin voltage and $R_{TH}$ is thevenin resistance

You might be interested in

Translating type screws are used: A. In translating machines B. For imparting motion to a mechanical part C. As a fastener to co

ivanzaharov [21]

Answer:

(b) for imparting motion to a mechanical part

Explanation:

a screw is a made of metal material usually hard metal it is mainly consist of a head at one end and a point at other end it also consist a shaft by virtue of which it can be change into other material there are many type of screw present translating type is one of them which is mostly use for imparting motion to a mechanical part

4 0

4 years ago

Explain why the scenario below fails to illustrate an understanding of the importance of metrology. Situation: Natalie is a cali

VMariaS [17]

Answer:

Explanation:

The situation being described completely fails in regard to the importance of metrology. This is because the main importance of metrology is making sure that all of the measurements in a process are as accurate as possible. This accuracy allows an entire process to function efficiently and without errors. In a food production plant, each individual department of the plant relies on the previous function to have completed their job with the correct and accurate instructions so that they can fulfill their functions correctly and end up with a perfect product. If the oven (like in this scenario) is a couple of degrees off it can cause the product to come out burned or undercooked, which will then get transferred to the next part of production which will also fail due to the failed input (burned or undercooked product). This will ultimately lead to an unusable product at the end of the process and money wasted. Which in a large production plant means thousands of products in a single batch are thrown away.

8 0

3 years ago

I need help on what’s and input and output to make the flowchart

e-lub [12.9K]

Input: what is put in, taken in, or operated on by any process or system.

Output: the amount of something produced by a person, machine, or industry.

3 0

3 years ago

Consider a very long rectangular fin attached to a flat surface such that the temperature at the end of the fin is essentially t

kodGreya [7K]

Answer:

$\frac{T-20}{130-20}= e^{-14.28*0.05}$

And if we solve for T we got:

$T= 20 + 110e^{-14.28*0.05} = 73.86 C$

The answer for this case would be $T = 73.86 C$ at 5cm from the base of the fin.

Explanation:

Data given

For this case we have the following data given:

$h = 20 \frac{W}{m^2 K}$ represent the heat transfer coefficient.

$p$ represent the perimeter for this case and would be given by:

$p = 2*0.05m +2*0.001m= 0.102m$

$k = 200 \frac{W}{m C}$ represent the thermal conductivity

$w = 5cm =0.05 m$ represent the width

$h = 1mm =0.001m$ represent the thickness

$A= wh= 0.05m *0.001m = 0.00005 m^2$

Solution to the problem

For this case we assume that we have steady conditions, the temperature of the fins varies just in one direction, the heat transfer coefficient not changes with the time and the thermal properties of the fin not change.

We can determine the temperature if the fin at x=5 cm=0.05 m from the base with the following formula:

$\frac{T-T_{\infty}}{T_b -T_{\infty}} = e^{-mx}$

Where m is a coefficient given by:

$m = \sqrt{\frac{hp}{kA}}=\sqrt{\frac{20 W/m^2 C 0.102 m}{200 W/ mC 0.00005 m^2}}= 14.28 m^{-1}$

The value of x for this case represent the distance $x =5 cm =0.05m$

$T_b =130 C$ represent the base temperature

$T_{\infty}= 20$ represent the temperature of the sorroundings or the ambient.

If we replace we have this:

$\frac{T-20}{130-20}= e^{-14.28*0.05}$

And if we solve for T we got:

$T= 20 + 110e^{-14.28*0.05} = 73.86 C$

The answer for this case would be $T = 73.86 C$ at 5cm from the base of the fin.

3 0

3 years ago

A square-thread power screw has a major diameter of 32 mm and a pitch of 4 mm with single threads, and it is used to raise a loa

Valentin [98]

Answer:

54mm.

Explanation:

So, we are given the following data or parameters or information that is going to assist in solving this type of question efficiently;

=> "A square-thread power screw has a major diameter of 32 mm"

=> "a pitch of 4 mm with single threads"

=> " and it is used to raise a load putting a force of 6.5 kN on the screw."

=> The coefficient of friction for both the collar and screw is .08."

=> "If the torque from the motored used to raise the load is limited to 26 N×M."

Step one: determine the lead angle. The lead angle can be calculated by using the formula below;

Lead angle = Tan^- (bg × T/ Jh × π ).

=> Jh = J - T/ 2. = 32 - 4/2. = 30mm.

Lead angle = Tan^- { 1 × 4/ π × 30} = 2.43°.

Step two: determine the Torque required to against thread friction.

Starting from; phi = tan^-1 ( 0.08) = 4.57°.

Torque required to against thread friction = W × Jh/2 × tan (lead angle + phi).

Torque required to against thread friction =( 6500 × 30/2) × tan ( 2.43° + 4.57°). = 11971.49Nmm.

Step three: determine the Torque required to against collar friction.

=> 2600 - 11971.49Nmm = 14028.51Nmm.

Step four = determine the mean collar friction.

Mean collar friction = 14028.51Nmm/0.08 × 6500 = 27mm

The mean collar diameter = 27 × 2 = 54mm.

5 0

3 years ago