Answer:
Between 5 & 10 MPa in Table B.1.4
Explanation:
150F = 65°C
State 1:
T = 65°C , x = 0.0; Table B.1.1: v = 0,001020 m^3
/kg
Process: T = constant = 65°C
State 2:
T, v = 0.99 x v
f (65°C) = 0.99 x 0,001020 = 0.0010098 m^3
/kg
Between 5 & 10 MPa in Table B.1.4
Answer:
DRAWING LOAD IS 
Explanation:
wire drawing is a method of obtaining wire of bigger large diameter from iron rod . it is cold process which need die to obtain wire
drawing load for wire drawing is given as P = 
Where A f is initial area, Ao is original area, σ is yield stress
as given in question sectional area reduce 60%, therefore
= 
Due to change in area ,drawing load p is
p = 
p =
Answer:
I'm going to make a list of everything you need to consider for the supervision and design of the bridge.
1. the materials with which you are going to build it.
2. the length of the bridge.
3. The dynamic and static load to which the bridge will be subjected.
4. How corrosive is the environment where it will be built.
5.wind forces
6. The force due to possible earthquakes.
7. If it is going to be built in an environment where snow falls.
8. The bridge is unique,so the shape has a geometry that resists loads?.
9. bridge costs.
10. Personal and necessary machines.
11. how much the river grows
Answer:
a)12 W = 0.01609 hp
b)12 W = 8.85 lbf-ft/s
Explanation:
Given that
Power produces by internal combustion engine = 12 W
a)As we know that
1 W = 0.001341 hp
So it means that
12 W = 0.001341 x 12 hp
12 W = 0.01609 hp
b)We also know that
1 W = 0.737 lbf-ft/s
So it means that
12 W = 0.737 x 12 lbf-ft/s
12 W = 8.85 lbf-ft/s
