All categories

4 years ago

Explain and justify which type of model to use in the final design phase to present to a client.

Engineering

1 answer:

sergey [27]4 years ago

8 0

Answer:

Visualization model

Explanation:

This type of model uses a computer to analyze and simulate data that require processing to enable presentation to users in a meaningful manner where even a layman could have a clue and understand the results expected. Through this model, results are presented in various forms such as plots of a the results against time for displaying relationships. For example a model that uses an animation could display results in various dimensions such as 2D and 3D ,and position in terms of orientation and position in respect to time.

You might be interested in

A solid cylinder of diameter 100 mm and height 50 mm is forged between two frictionless flat dies to a height of 25 mm. What is

coldgirl [10]

Answer:

d. 41.4

Explanation:

The initial diameter di = 100mm

The initial height hi {✓59m

Final height = 25 m

Final diameter = ?

Initial volume = after forging volume

D*(di)²*hi = D *(df)²*hf

D will cancel out from either sides of the equation

100² x 50 = df²x25

10000x2 = df²

20000 = df²

df = √20000

df = 141.42mm

Change in diameter = 141.42-100

= 41.42

The percentage change = 41.42/100*100

= 41.4%

The last option is the answer

4 0

4 years ago

Question in Probability and Statistics 2<br>

Ghella [55]

Since we both have a question in same subject may u help me with this For a confidence level of 80% with a sample size of 21, find the critical t value

7 0

3 years ago

Air expands through a turbine from 10 bar, 900 K to 1 bar, 500 K. The inlet velocity is small compared to the exit velocity of 1

Elis [28]

Answer:

- the mass flow rate of air is 7.53 kg/s

- the exit area is 0.108 m²

Explanation:

Given the data in the question;

lets take a look at the steady state energy equation;

m" = W" $_{cv$ / [ (h₁ - h₂ ) - $\frac{V_2^2}{2}$ ]

Now at;

T₁ = 900K, h₁ = 932.93 k³/kg

T₂ = 500 K, h₂ = 503.02 k³/kg

so we substitute, in our given values

m" = [ 3200 kW × $\frac{1\frac{k^3}{s} }{1kW}$ ] / [ (932.93 - 503.02 )k³/kg - $\frac{100^2\frac{m^2}{s^2} }{2}$ | $\frac{ln}{kg\frac{m}{s^2} }$ || $\frac{1kJ}{10^3N-m}$ | ]

m" = 7.53 kg/s

Therefore, the mass flow rate of air is 7.53 kg/s

now, Exit area A₂ = v₂m" / V₂

we know that; pv = RT

A₂ = RT₂m" / P₂V₂

so we substitute

A₂ = {[ $(\frac{8.314}{28.97}\frac{k^3}{kg.K})$ × $500 K$ × $(7.54 kg/s)$ ] / [(1 bar)(100 m/s )]} | $\frac{1 bar}{10N/m^2}$ || $10^3N.m/1k^3$

A₂ = 0.108 m²

Therefore, the exit area is 0.108 m²

8 0

3 years ago

The article "Display of Health Risk Behaviors on MySpace by Adolescents"† described a study in which researchers looked at a ran

nadya68 [22]

Answer:

True. 18-year old teenagers that practice some sport or have a hobby have less references to substance abuse or violence.

Explanation:

When someone practices a certain sport, he/she is occupied with its sport, also, sports encourage responsability, discipline and takes most of the person´s time and energy. People who doesn´t practice sports or have any hobby have more idle time and is always looking for something to take away the boredom. Most of the cases they start doing drugs or start having violent episodes because is what´s more handful and gives them the dopamine that the sport is not giving them (because they don´t practice any).

This is way the display of sports or hobbies involvements is associated with decreased references to risky behavior.

7 0

3 years ago

Design a half-wave recti er which provides a peak voltage of 15 V, and anaverage voltage of 3.8 V when driven by a 120 V (rms) a

nirvana33 [79]

Answer:

You need a 120V to 24V commercial transformer (transformer 1:5), a 100 ohms resistance, a 1.5 K ohms resistance and a diode with a minimum forward current of 20 mA (could be 1N4148)

Step by step design:

Because you have a 120V AC voltage supply you need an efficient way to reduce that voltage as much as possible before passing to the rectifier, for that I recommend a standard 120V to 24V transformer. 120 Vrms = 85 V and 24 Vrms = 17V = Vin
Because 17V is not 15V you still need a voltage divider to step down that voltage, for that we use R1 = 100Ω and R2 = 1.3KΩ. You need to remember that more than 1 V is going to be in the diode, so for our calculation we need to consider it. Vf = (V*R2)/(R1+R2), V = Vin - 1 = 17-1 = 16V and Vf = 15, Choosing a fix resistance R1 = 100Ω and solving the equation we find R2 = 1.5KΩ
Finally to select the diode you need to calculate two times the maximum current and that would be the forward current (If) of your diode. Imax = Vf/R2 = 10mA and If = 2*Imax = 20mA

Our circuit meet the average voltage (Va) specification:

Va = (15)/(pi) = 4.77V considering the diode voltage or 3.77V without considering it

6 0

4 years ago