Answer:
you should probably take it
Explanation:
An extended vehicle warranty typically starts once the manufacturer's warranty expires, but in some cases, the two protection plans overlap.
Answer and Explanation:
The main objective that the torsion test serves is the determination of the material behavior or the behavior of the test sample when subjected to torsional stresses or forces due to the application of moments that results in shear stress along the axis.
Plasticity is the property of elastic material and tension or shear stresses leads to plasticity in a material where these links are the weakest, that gives torsion test a major advantage over the tension test.
Torsion tests are performed on materials to deduct properties like the shear modulus of elasticity, the torsional strength, and the MOR, i.e., Modulus of Rupture.
This test can be used to obtain larger strain values of strain without any complexity as that in tension test.
This test provides a curve of shear-stress-shear strain which is more significant in determining the plasticity as compared to the curve of stress-strain in tension test.
Maximum torque for a given value of maximum stress will be 2 times higher in torsion as that of tension.
In torsion, for plastic flow, the threshold value of shear stress is achieved before the threshold value of normal stress for fracture whereas in tension the critical value of normal stress is achieved sooner than the critical shear for plastic flow.
Explanation:
You have to help the person you hit and with this you hand yourself over to the authorities so that you don't get involved in a murder and save the lives of others.
Answer:
vertical, and directed along an axis of symmetry of the cross-section
Explanation:
Shear is a force in an object is in the form of stress or strain. Shear strain is the ratio of length of deformation (extension) to the perpendicular length in the plane of the force applied. Shear stress, which is the stress that tends to shear a material, is the ratio of shear force applied on a surface to the area of the surface.
The shear formula can be used to determine the maximum shear in an object and is given by; τ = . It is applicable when the internal shear force is vertical and directed along an axis of symmetry of the cross-section.