PART A)
Equivalent resistance in parallel is given as
now we have
PART B)
since potential difference across all resistance will remain same as all are in parallel
so here we can use ohm's law
As we know i = 7 A current flows through 15 ohm resistance
PART C)
Similarly ohm's law for 20 ohm resistance we can say
Answer:
A=50mΩ
B≅50mΩ
Explanation:
A) To answer this question we have to use the Current Divider Rule. that rule says:
(1)
Itotal represents the new maximun current, 50mA, Ix is the current going through the 100 ohms resistor, and Req. is the equivalent resitor.
We now have a set of two resistor in parallel, so:
(2)
where R1 is the resitor we have to calculate, and R2 is the 100 ohms resistor (25 uA).
substituting and rearranging (2)
(3)
Now substituting (3) in (1).
solving this, The value of R1 is: 50mΩ
This value of R1 will guaranty that the ammeter full reflection willl be at 50mA.
Given that R2 (100ohm) it too much bigger than 50mΩ, the equivalent resistor will tend to 50mΩ
If you substitude this values on (2) Req. will be 49.97 mΩ.