When testing a laptop power connector, the voltage measured has be close to +/- 5% to the accepted voltage of the laptop. This is to ensure that the power connector would not pose any hazard to the user and is safe for use. So, for instance the accepted voltage is 19 V, when you test the power connector it should be that the reading is between 18 V to 20 V. Any reading below or above that range is not recommended for use. You can locate the accepted voltage on the battery or the laptop itself. To test a power connector, you can use a volt meter or a multi meter.
Answer:
9 - 10N to the left
10 - There is no change on the object
Explanation:
Can I have brainliest answer pls?
An object is in motion if its distance relative to another object is changing. To tell if an object is moving, you use a reference point. If an object's distance from another object [reference point] is changing. A place or object used for comparison to determine if something is in motion.
The answers are A and D.
Engine oil reacts with rubber, changing its properties and causing it to expand. This will compromise rubber seals in the brake system and lead to a failure.
I got A it was the same question to. Guess its a different answer for every one
