Study the image below.

In the image, not to scale, which phase of the moon would you observe from earth?

timofeeve [1]

Answer:

The "new" moon phase is being shown because the moon shown is directly between the sun and earth and is not visible from the earth because of the brightess of the sun.

8 0

3 years ago

Effciency of a lever is never 100% or more. why?Give reason

Troyanec [42]

Answer:

Ideally, the work output of a lever should match the work input. However, because of resistance, the output power is nearly always be less than the input power. As a result, the efficiency would go below $100\%$ .

Explanation:

In an ideal lever, the size of the input and output are inversely proportional to the distances between these two forces and the fulcrum. Let $D_\text{in}$ and $D_\text{out}$ denote these two distances, and let $F_\text{in}$ and $F_\text{out}$ denote the input and the output forces. If the lever is indeed idea, then:

$F_\text{in} \cdot D_\text{in} = F_\text{out} \cdot D_\text{out}$ .

Rearrange to obtain:

$\displaystyle F_\text{in} = F_\text{out} \cdot \frac{D_\text{out}}{D_\text{in}}$

Class two levers are levers where the perpendicular distance between the fulcrum and the input is greater than that between the fulcrum and the output. For this ideal lever, that means $D_\text{in} > D_\text{out}$ , such that $F_\text{in} < F_\text{out}$ .

Despite $F_\text{in} < F_\text{out}$ , the amount of work required will stay the same. Let $s_\text{out}$ denote the required linear displacement for the output force. At a distance of $D_\text{out}$ from the fulcrum, the angular displacement of the output force would be $\displaystyle \frac{s_\text{out}}{D_\text{out}}$ . Let $s_\text{in}$ denote the corresponding linear displacement required for the input force. Similarly, the angular displacement of the input force would be $\displaystyle \frac{s_\text{in}}{D_\text{in}}$ . Because both the input and the output are on the same lever, their angular displacement should be the same:

$\displaystyle \frac{s_\text{in}}{D_\text{in}} =\frac{s_\text{out}}{D_\text{out}}$ .

Rearrange to obtain:

$\displaystyle s_\text{in}=s_\text{out} \cdot \frac{D_\text{in}}{D_\text{out}}$ .

While increasing $D_\text{in}$ reduce the size of the input force $F_\text{in}$ , doing so would also increase the linear distance of the input force $s_\text{in}$ . In other words, $F_\text{in}$ will have to move across a longer linear distance in order to move $F_\text{out}$ by the same $s_\text{out}$ .

The amount of work required depends on both the size of the force and the distance traveled. Let $W_\text{in}$ and $W_\text{out}$ denote the input and output work. For this ideal lever:

$\begin{aligned}W_\text{in} &= F_\text{in} \cdot s_\text{in} \\ &= \left(F_\text{out} \cdot \frac{D_\text{out}}{D_\text{in}}\right) \cdot \left(s_\text{out} \cdot \frac{D_\text{in}}{D_\text{out}}\right) \\ &= F_\text{out} \cdot s_\text{out} = W_\text{out}\end{aligned}$ .

In other words, the work input of the ideal lever is equal to the work output.

The efficiency of a machine can be measured as the percentage of work input that is converted to useful output. For this ideal lever, that ratio would be $100\%$ - not anything higher than that.

On the other hand, non-ideal levers take in more work than they give out. The reason is that because of resistance, $F_\text{in}$ would be larger than ideal:

$\displaystyle F_\text{in} = F_\text{out} \cdot \frac{D_\text{out}}{D_\text{in}} + F(\text{resistance})$ .

As a result, in real (i.e., non-ideal) levers, the work input will exceed the useful work output. The efficiency will go below $100\%$ ,

4 0

3 years ago

What is the area in phisics that involve sound

kakasveta [241]

Explanation:

Sound waves are often simplified to a description in terms of sinusoidal plane waves, which are characterized by these generic properties:

Frequency, or its inverse, wavelength.

Amplitude, sound pressure or Intensity.

Speed of sound.

Direction.

3 0

4 years ago

You push against a steamer trunk with a force of 750 N at an angle of 25° with the horizontal . The trunk is on a flat floor and

djverab [1.8K]

This means that the horizontal force is 750sin(25°). To be able to move the truck, force applied must be greater than static friction, which equals to its coefficient (0.77) x normal contact force (= weight)

Hence, 750sin(25°) = 0.77mg. m = 750sin(25°)/(0.77g)

3 0

3 years ago

What two things are caused by a balanced forces

77julia77 [94]

Answer:

Floating in water

Hanging objects

Explanation: trust me

3 0

3 years ago