Answer:
(a) 0.204 Weber
(b) 0.22 Volt
Explanation:
N = 100, radius, r = 10 cm = 0.1 m, B = 0.0650 T, angle is 90 degree with the plane of coil, so theta = 0 degree with the normal of coil.
(a) Magnetic flux, Ф = N x B x A
Ф = 100 x 0.0650 x 3.14 x 0.1 0.1
Ф = 0.204 Weber
(b) B1 = 0.0650 T, B2 = 0.1 T, dt = 0.5 s
dB / dt = (B2 - B1) / dt = (0.1 - 0.0650) / 0.5 = 0.07 T / s
induced emf, e = N dФ/dt
e = N x A x dB/dt
e = 100 x 3.14 x 0.1 x 0.1 x 0.07 = 0.22 V
Answer:
cell pohnes convert sound waves into radio waves
electromagnetic waves used in cellphone communications are called: radio waves
To send out a radio signal far and wide.. it is called: broadcast
Explanation:
Answer:
the airspeed indicated by the pitot-tube driven airspeed indicator is 91.23m/s
Explanation:
Pitot tube

U = velocity(m/s)
= stagnation pressure (pa)
= static pressure (pa)
d = fluid density(kg/m³)

v = true velocity
= 101325 + 1/2(1.225)(25)²


d = 1.225kg/m³

the airspeed indicated by the pitot-tube driven airspeed indicator is 91.23m/s
First question (upper left):
1/Req = 1/12 + 1/24 = 1/8
Req = 8 ohms
Voltage is equal through different resistors, and V1 = V2 = 24 V.
Current varies through parallel resistors: I1 = V1/R1 = 24/12 = 2 A. I2 = 24/24 = 1 A.
Second question (middle left):
V1 = V2 = 6 V (parallel circuits)
I1 = 2 A, I2 = 1 A, IT = 2+1 = 3 A.
R1 = V1/I1 = 6/2 = 3 ohms, R2 = 6/1 = 6 ohms, 1/Req = 1/2 + 1/1, Req = 2/3 ohms
Third question (bottom left):
V1 = V2 = 12 V
IT = 3 A, meaning Req = V/It = 12 V/3 A = 4 ohms
1/Req = 1/R1 + 1/R2, 1/4 = 1/12 + 1/R2, R2 = 6 ohms
I1 = V/R1 = 1 A, I2 = V/R2 = 2 A
Fourth question (top right):
1/Req = 1/20 + 1/20, Req = 10 ohms
IT = 4 A, so VT = IT(Req) = 4*10 = 40 V
Parallel circuits, so V1 = V2 = VT = 40 V
Since the resistors are identical, the current is split evenly between both: I1 = I2 = IT/2 = 2 A.
Fifth question (middle right):
1/Req = 1/5 + 1/20 + 1/4, Req = 2 ohms
IT = VT/Req = 40 V/2 ohms = 20 A
V1 = V2 = V3 = 40 V
The current of 20 A will be divided proportionally according to the resistances of 5, 20, and 4, the factors will be 5/(5+20+4), 20/(5+20+4), and 4/(5+20+4), which are 5/29, 20/29, and 4/29.
I1 = 20(5/29) = 100/29 A
I2 = 20(20/29) = 400/29 A
I3 = 20(4/29) = 80/29 A
Sixth question (bottom right):
V2 = 30V is given, but since these are parallel circuits, V1 = VT = 30 V.
Then I1 = V1/R1 = 30 V/10 ohms = 3 A.
I2 = 30 V/15 ohms = 2 A.
IT = 3 + 2 = 5 A
1/Req = 1/10 + 1/15, Req = 6 ohms
Recall that mass is the amount of matter present in a body. That means it's a property that is consistent regardless of the body's current location, gravity's pull on the body, etc.
Let's not confuse mass with weight (which is a force computed as Weight = mass x acceleration). Mass will remain constant and that means that whether the object is on Earth or on Mars, its mass remains the same. Thus, the object will still have 2.00 kg as mass on Mars.
Answers: 2.00 kilograms