Archimedes found a piece of gold and a piece of silver with exactly the same mass. He dropped the gold into a bowl filled to the brim with water and measured the volume of water that spilled out. Then he did the same thing with the piece of solver. Although both metals had the same mass, the silver gad a larger volume; therefore, it displaced more water than the gold did. That's because the silver was less dense than gold. Afterwards he applied the same method to the crown for the king he served who had got a new crown from a jeweler who gave it to him. Archimedes found a piece of pure gold that had the same mass as the crown. He placed the pure gold chuck and the crown in water, one at a time. The crown displaced more water the piece of gold. Therefore, its density was less than pure gold.
Answer:
a) 
b) 
c) 
d) 
would be the same.
would decrease.
would be the same.
Explanation:
a) On an inclined plane the force of gravity is the sine component of the weight of the block.
b) The friction force is equal to the normal force times coefficient of friction.
c) The work done by the normal force is zero, since there is no motion in the direction of the normal force.
d) The relation between the vertical height and the distance on the ramp is
According to this relation, the work done by the gravity wouldn't change, since the force of gravity includes a term of 
.
The work done by the friction force would decrease, because both the cosine term and the distance on the ramp would decline.
The work done by the normal force would still be zero.
Answer:
answer is 10km
Explanation:
use "S =Ut "
S=distance U=velocity t =time
no need to convert time into seconds as the velocity has given in meters per minute
Answer:
N₂ / N₁ = 13.3
Explanation:
A transformer is a system that induces a voltage in the secondary due to the variation of voltage in the primary, the ratio of voltages is determined by the expression
ΔV₂ = N₂ /N₁ ΔV₁
where ΔV₂ and ΔV₁ are the voltage in the secondary and primary respectively and N is the number of windings on each side.
In this case, they indicate that the primary voltage is 9.0 V and the secondary voltage is 120 V
therefore we calculate the winding ratio
ΔV₂ /ΔV₁ = N₂ / N₁
N₂ / N₁ = 120/9
N₂ / N₁ = 13.3
s good clarify that in transformers the voltage must be alternating (AC)
