The table organizes data about the planets' sizes, makeups, and distances from the sun.
2 answers:
You might be interested in
a) 50.8 mm
b) The whole image (1:1)
c) It seems reasonable
Explanation:
a)
To project the image on the film, the distance of the film from the lens must be equal to the distance of the image from the lens. This can be found by using the lens equation:
where
f is the focal length of the lens
p is the distance of the object from the lens
q is the distance of the image from the lens
In this problem:
f = 50.0 mm = 0.050 m is the focal length (positive for a convex lens)
p = 3.00 m is the distance of the person from the lens
Therefore, we can find q:
b)
Here we need to find the height of the image first.
This can be done by using the magnification equation:
where:
y' is the height of the image
y = 1.75 m is the height of the real person
q = 50.8 mm = 0.0508 m is the distance of the image from the lens
p = 3.00 m is the distance of the person from the lens
Solving for y', we find:
(the negative sign means the image is inverted)
Therefore, the size of the image (29.6 mm) is smaller than the size of the film (36.0 mm), so the whole image can fit into the film.
c)
This seems reasonable: in fact, with a 50.0 mm focal length, if we try to take the picture of a person at a distance of 3.00 m, we are able to capture the whole image of the person in the photo.
Answer:
N
N
Explanation:
= 1 A
= 4 A
= distance between the two wire = 5 m
= Force per unit length acting between the two wires
Force per unit length acting between the two wires is given as
N
= distance of each wire from the midpoint = 2.5 m
Magnetic field midway between the two wires is given as
Explanation:
We have,
Length of a metal rod is 55 cm or 0.55 m
Change in length is 0.2 cm or 0.002 m
It is required to find the change in temperature of a metal rod. The coefficient of linear expansion is given by :
is the change in temperature
So, the change in temperature is 303.03 degrees Celsius.