Answer:
True, <em>Regeneration is the only process where increases the efficiency of a Brayton cycle when working fluid leaving the turbine is hotter than working fluid leaving the compressor</em>.
Option: A
<u>Explanation:
</u>
To increase the efficiency of brayton cycle there are three ways which includes inter-cooling, reheating and regeneration. <em>Regeneration</em> technique <em>is used when a turbine exhaust fluids have higher temperature than the working fluid leaving the compressor of the turbine. </em>
<em>Thermal efficiency</em> of a turbine is increased as <em>the exhaust fluid having higher temperatures are used in heat exchanger where the fluids from the compressor enters and increases the temperature of the fluids leaving the compressor.
</em>
Answer:
Both of them are wrong
Explanation:
The two technicians have given the wrong information about the wires.
This is because firstly, a higher rating of AWG means it is smaller in diameter. Thus, the diameter of a 18 AWG wire is smaller than that of a 12 AWG wire and that makes the assertion of the technician wrong.
Also, the higher the resistance, the smaller the cross sectional area meaning the smaller the diameter. A wire with bigger cross sectional area will have a smaller resistance
So this practically makes the second technician wrong too
Answer:
View Image
Explanation:
Initialize your variable as a float or double since you're going to be using fractions in your answer.
User scanf() to get user input.
Print out the sum, product, quotient, and difference between the two numbers.
Answer:
h = 10,349.06 W/m^2 K
Explanation:
Given data:
Inner diameter = 3.0 cm
flow rate = 2 L/s
water temperature 30 degree celcius




at 30 degree celcius 

Re = 106390
So ,this is turbulent flow



SOLVING FOR H
WE GET
h = 10,349.06 W/m^2 K