A car traveling at a speed of 25 m/s increases its speed to 30 m/s in 10 sec. What is the acceleration of the car?

The outer layer of cable on a cable reel is 16.2 cm from the center of the reel. The reel is initially stationary and can rotate

ahrayia [7]

Answer:

B. w=12.68rad/s

C. α=3.52rad/s^2

Explanation:

B)

We can solve this problem by taking into account that (as in the uniformly accelerated motion)

$\theta=\omega_{0}t+\frac{1}{2}\alpha t^{2}\\\theta = \frac{s}{r}$ ( 1 )

where w0 is the initial angular speed, α is the angular acceleration, s is the arc length and r is the radius.

In this case s=3.7m, r=16.2cm=0.162m, t=3.6s and w0=0. Hence, by using the equations (1) we have

$\theta=\frac{3.7m}{0.162m}=22.83rad$

$22.83rad=\frac{1}{2}\alpha (3.6s)^2\\\\\alpha=2\frac{(22.83rad)}{3.6^2s}=3.52\frac{rad}{s^2}$

to calculate the angular speed w we can use $\alpha=\frac{\omega _{f}-\omega _{i}}{t _{f}-t _{i}}\\\\\omega_{f}=\alpha t_{f}=(3.52\frac{rad}{s^2})(3.6)=12.68\frac{rad}{s}$

Thus, wf=12.68rad/s

C) We can use our result in B)

$\alpha=3.52\frac{rad}{s^2}$

I hope this is useful for you

regards

3 0

3 years ago

Read 2 more answers

What is tensor quantity?<br>Is Inertia a tensor? give reason

pickupchik [31]

Answer:

A tensor is a quantity, for example a stress or a strain, which has magnitude, direction, and a plane in which it acts. Stress and strain are both tensor quantities. ... A tensor is a quantity, for example a stress or a strain, which has magnitude, direction, and a plane in which it acts.

Inertia Tensor. where I = the inertia tensor. The angular momentum of a rigid body rotating about an axis passing through the origin of the local reference frame is in fact the product of the inertia tensor of the object and the angular velocity. ... As shown in [7], the inertia tensor is symmetric.

Explanation:

Hope dis help

5 0

3 years ago

A team of engineering students is testing their newly designed 200 kg raft in the pool where the diving team practices. The raft

elena-s [515]

Answer:

The water level rises more when the cube is located above the raft before submerging.

Explanation:

These kinds of problems are based on the principle of Archimedes, who says that by immersing a body in a volume of water, the initial water level will be increased, raising the water level. That is, the height in the container with water will rise in level. The difference between the new volume and the initial volume of the water will be the volume of the submerged body.

Now we have two moments when the steel cube is held by the raft and when it is at the bottom of the pool.

When the cube is at the bottom of the water we know that the volume will increase, and we can calculate this volume using the volume of the cube.

Vc = 0.45*0.45*0.45 = 0.0911 [m^3]

Now when a body floats it is because a balance is established in the densities, the density of the body and the density of the water.

$Ro_{H2O}=R_{c+r}\\where:\\Ro_{H2O}= water density = 1000 [kg/m^3]\\Ro_{c+r}= combined density cube + raft [kg/m^3]$

Density is given by:

Ro = m/V

where:

m= mass [kg]

V = volume [m^3]

The buoyancy force can be calculated using the following equation:

$F_{B}=W=Ro_{H20}*g*Vs\\W = (200+730)*9.81\\W=9123.3[N]\\\\9123=1000*9.81*Vs\\Vs = 0.93 [m^3]$

Vs > Vc, What it means is that the combined volume of the raft and the cube is greater than that of the cube at the bottom of the pool. Therefore the water level rises more when the cube is located above the raft before submerging.

7 0

4 years ago

A 10-kg piece of aluminum sits at the bottom of a lake, right next to a 10-kg piece of lead, which is much denser than aluminum.

zalisa [80]

Answer:

Aluminium

Explanation:

When a body is immersed in a liquid partly or wholly it experiences an upward force which is called buoyant force.

The amount of buoyant force depends on the volume of body immersed, density of liquid and the value of acceleration due to gravity.

Here, the density of liquid is same in both the cases and g be the same. So, here the amount of buoyant force depends on the volume of body immersed.

As the density of lead is more than the density of aluminium, so the volume of aluminium is more than lead, as volume is equal to mass divided by density. So, the buoyant force acting on the aluminium is more than lead.

7 0

3 years ago

Photons with the highest energy have the ____

Setler79 [48]

Answer:

D. shortest wavelength

Explanation:

Photons with the highest energy have the shortest wavelength. The shorter the wavelength, the higher the energy of a photon.

A photon is a quantity that transmits electromagnetic energy from one place to the other.

Gamma rays have photons that transmits the highest amount of energy.
The rays have the shortest wavelength and highest frequency of all electromagnetic radiations.

Energy, wavelength and frequency of a photon are connected using the expression:

E = h f = $\frac{hc}{wavelength}$

E is the energy

h is the Planck's constant

f is the frequency.

3 0

3 years ago