Answer:
a) -1.46 x 10∧-5, 1.445x 10∧-4, -6.355 x 10∧-4
b) 3.926 x 10∧-4, -2.626 x 10∧-4
c) 6.552 x 10∧-4, 6.5 x 10∧-5
Explanation:
a) -1.46 x 10∧-5, 1.445x 10∧-4, -6.355 x 10∧-4
b) 3.926 x 10∧-4, -2.626 x 10∧-4
c) 6.552 x 10∧-4, 6.5 x 10∧-5
The explanation is shown in the attachment. I hope i have been able to help.
Answer:
Explanation:
In the diagram there three gears in which gear 1 is input gear ,gear 2 is idle gear and gear 3 is out put gear.
Lets take
All external matting gears will rotates in opposite direction with respect to each other.
So the speed of gear third can be given as follows
Answer:
The tube surface temperature immediately after installation is 120.4°C and after prolonged service is 110.8°C
Explanation:
The properties of water at 100°C and 1 atm are:
pL = 957.9 kg/m³
pV = 0.596 kg/m³
ΔHL = 2257 kJ/kg
CpL = 4.217 kJ/kg K
uL = 279x10⁻⁶Ns/m²
KL = 0.68 W/m K
σ = 58.9x10³N/m
When the water boils on the surface its heat flux is:
For copper-water, the properties are:
Cfg = 0.0128
The heat flux is:
qn = 0.9 * 18703.42 = 16833.078 W/m²
The tube surface temperature immediately after installation is:
Tinst = 100 + 20.4 = 120.4°C
For rough surfaces, Cfg = 0.0068. Using the same equation:
ΔT = 10.8°C
The tube surface temperature after prolonged service is:
Tprolo = 100 + 10.8 = 110.8°C