What gas? Gas is an invisible form so I don't see how it would have a "defined structure".
Electrical power, in watts = (voltage, in volts) x (current, in Amperes)
<h3><u>Answer and Explanation</u>;</h3>
- input force refers to the force exerted on a machine, also known as the effort, while the output force is the force machines produce or the Load. The ratio of output force to input force gives the mechanical advantage of a simple machine
- <em><u>The output force exerted by the rake must be less than the input force because one has to use force while raking. The force used to move the rake is the input force. </u></em>
- <em><u>The rake is not going to be able to convert all of the input force into output force, the force the rake applies to move the leaves, because of friction.</u></em>
<span>Objective Lenses: Usually you will find 3 or 4 objective lenses on a microscope. They almost always consist of 4X, 10X, 40X and 100X powers. When coupled with a10X (most common) eyepiece lens, we get total magnifications of 40X (4X times10X), 100X , 400X and 1000X.</span>
Answer:
Option B, two walls and the floor
Explanation:
The distance should be measured from the point where at least the three axed meet.
Two walls and the floor are equivalent to three axes.
Vertical wall 1 = Y Axis
Horizontal wall2 = X Axis
Floor = Z Axis
Thus, the distance should be measured from the point where two walls and one floor meet.
Option , B is correct
