All categories

3 years ago

How are deltas formed?

Engineering

2 answers:

NikAS [45]3 years ago

5 0

Answer:

C: deposition from flow into a lake or an ocean

Explanation:

deposition from rivers creates a variety of features, delta deposits created by flow into lake or ocean, is one of them.

hammer [34]3 years ago

3 0

Answer:

It is created from deposition from flow into a lake or an ocean like the Missisippi delta

Explanation:

You might be interested in

A heat engine operates between 2 reservoirs at TH and 18oC. The heat engine receives 17,000 kJ/h from the high temperature reser

lisabon 2012 [21]

Answer:

See explaination

Explanation:

Please kindly check attachment for the step by step solution of the given problem

4 0

3 years ago

Two common methods of improving fuel efficiency of a vehicle are to reduce the drag coefficient and the frontal area of the vehi

qaws [65]

Answer:

$\Delta V = 209.151\,L$ , $\Delta C = 217.517\,USD$

Explanation:

The drag force is equal to:

$F_{D} = C_{D}\cdot \frac{1}{2}\cdot \rho_{air}\cdot v^{2}\cdot A$

Where $C_{D}$ is the drag coefficient and $A$ is the frontal area, respectively. The work loss due to drag forces is:

$W = F_{D}\cdot \Delta s$

The reduction on amount of fuel is associated with the reduction in work loss:

$\Delta W = (F_{D,1} - F_{D,2})\cdot \Delta s$

Where $F_{D,1}$ and $F_{D,2}$ are the original and the reduced frontal areas, respectively.

$\Delta W = C_{D}\cdot \frac{1}{2}\cdot \rho_{air}\cdot v^{2}\cdot (A_{1}-A_{2})\cdot \Delta s$

The change is work loss in a year is:

$\Delta W = (0.3)\cdot \left(\frac{1}{2}\right)\cdot (1.20\,\frac{kg}{m^{3}})\cdot (27.778\,\frac{m}{s})^{2}\cdot [(1.85\,m)\cdot (1.75\,m) - (1.50\,m)\cdot (1.75\,m)]\cdot (25\times 10^{6}\,m)$

$\Delta W = 2.043\times 10^{9}\,J$

$\Delta W = 2.043\times 10^{6}\,kJ$

The change in chemical energy from gasoline is:

$\Delta E = \frac{\Delta W}{\eta}$

$\Delta E = \frac{2.043\times 10^{6}\,kJ}{0.3}$

$\Delta E = 6.81\times 10^{6}\,kJ$

The changes in gasoline consumption is:

$\Delta m = \frac{\Delta E}{L_{c}}$

$\Delta m = \frac{6.81\times 10^{6}\,kJ}{44000\,\frac{kJ}{kg} }$

$\Delta m = 154.772\,kg$

$\Delta V = \frac{154.772\,kg}{0.74\,\frac{kg}{L} }$

$\Delta V = 209.151\,L$

Lastly, the money saved is:

$\Delta C = \left(\frac{154.772\,kg}{0.74\,\frac{kg}{L} }\right)\cdot (1.04\,\frac{USD}{L} )$

$\Delta C = 217.517\,USD$

4 0

4 years ago

A gas flows through a one-inlet, one-exit control volume operating at steady state. Considering an adiabatic control volume with

Hunter-Best [27]

Answer:

b. equal to the specific entropy of the gas at the inlet.

Explanation:

Isentropic process is the process in which the entropy of the system remains unchanged. The word isentropic is formed from the combination of the prefix "iso" which means "equal" and the word entropy.

If a process is completely reversible, without the need to provide energy in the form of heat, then the process is isentropic.

3 0

4 years ago

In the lab, a container of saturated soil had a mass of 113.27 g before it was placed in the oven and100.06 g after the soil had

kipiarov [429]

Answer:

Moisture/ water content w = 26%

Void ratio , e = 0.73

Explanation:

Initial mass of saturated soil w1 = mass of soil - weight of container

= 113.27 g - 49.31 g = 63.96 g

Final mass of soil after oven w2 = mass of soil - weight of container

= 100.06 g - 49.31 g = 50.75

Moisture /water content, w = $\frac{w1-w2}{w2}$ = $\frac{63.96-50.75}{50.75}$ = 0.26 = 26%

Void ratio = water content X specific gravity of solid

= 0.26 X 2.80 =0.728

5 0

3 years ago

A patient has swollen feet, ankles, and legs, and has pain in his lower back. Tests show the level of urea, a waste product, in

myrzilka [38]

Answer: B Excretory

Explanation: Hope this helps :)

3 0

3 years ago