All categories

3 years ago

3. How can statistical analysis of a dataset inform a design process?

Engineering

1 answer:

MrRa [10]3 years ago

6 0

Explanation:

I don't know I'm so sorry

You might be interested in

When adding two 8 bit binary numbers, which of the following statements is true?

diamong [38]

Answer:

The result might require 9 bits to store

4 0

2 years ago

Most pedestrian fatalities occur

Makovka662 [10]

Answer: Outside an intersections

Explanation:

6 0

3 years ago

A gas cylinder is connected to a manometer that contains water. The other end of the manometer is open to the atmosphere, which

horrorfan [7]

Answer: the absolute static pressure in the gas cylinder is 82.23596 kPa

Explanation:

Given that;

patm = 79 kPa, h = 13 in of H₂O,

A sketch of the problem is uploaded along this answer.

Now

pA = patm + 13 in of H₂O ( h × density × g )

pA= 79 + (13 × 0.0254 × 9.8 × 1000/1000)

pA = 82.23596 kPa

the absolute static pressure in the gas cylinder is 82.23596 kPa

4 0

3 years ago

A completely reversible heat pump produces heat at a rate of 300 kW to warm a house maintained at 24 °C. The exterior air, which

trapecia [35]

Answer:

No.

Explanation:

The Coefficient of Performance of the reversible heat pump is determined by the Carnot's cycle:

$COP_{HP} = \frac{T_{H}}{T_{H}-T_{L}}$

$COP_{HP} = \frac{297.15\,K}{297.15\,K-280.15\,K}$

$COP_{HP} = 3.339$

The power required to make the heat pump working is:

$\dot W = \frac{300\,kW}{3.339}$

$\dot W = 89.847\,kW$

The heat absorbed from the exterior air is:

$\dot Q_{L} = 300\,kW - 89.847\,kW$

$\dot Q_{L} = 210.153\,kW$

According to the Second Law of Thermodynamics, the entropy generation rate in a reversible cycle must be zero. The formula for the heat pump is:

$\frac{\dot Q_{L}}{T_{L}} - \frac{\dot Q_{H}}{T_{H}} + \dot S_{gen} = 0$

$\dot S_{gen} = \frac{\dot Q_{H}}{T_{H}} - \frac{\dot Q_{L}}{T_{L}}$

$\dot S_{gen} = \frac{300\,kW}{297.15\,K}-\frac{210.153\,kW}{280.15\,K}$

$\dot S_{gen} = 0.259\,\frac{kW}{K}$

Which contradicts the reversibility criterion according to the Second Law of Thermodynamics.

5 0

3 years ago

An ideal fluid flows through a pipe made of two sections with diameters of 1.0 and 3.0 inches, respectively. The speed of the fl

geniusboy [140]

Answer:

$(\frac{r_1}{r_2})^2=\frac{1}{9}$

Explanation:

From the question we are told that:

Diameter 1 $d_1=1.0$

Diameter 2 $d_2=3.0$

Generally the equation for Radius is mathematically given by

At Diameter 1

$r_{1}=\frac{1}{2} inch$

At Diameter 2

$r_{2}=\frac{3}{2} inch$

Generally the equation for continuity is mathematically given by

$A_1V_1=A_2V_2$

Therefore

$(\frac{r_1}{r_2})^2=(\frac{1/2}{3/2})^2$

$(\frac{r_1}{r_2})^2=\frac{1}{9}$

5 0

3 years ago