All categories

3 years ago

Why do screw need hardness

Engineering

1 answer:

garik1379 [7]3 years ago

7 0

Answer:

i also want to know about it

Explanation:

Because i dont know

You might be interested in

g A smooth pipeline with a diameter of 5 cm carries glycerin at 20 degrees Celsius. The flow rate in the pipe is 0.01 m3/s. What

earnstyle [38]

Answer:

The friction factor is 0.303.

Explanation:

The flow velocity ( $v$ ), measured in meters per second, is determined by the following expression:

$v = \frac{4\cdot \dot V}{\pi \cdot D^{2}}$ (1)

Where:

$\dot V$ - Flow rate, measured in cubic meters per second.

$D$ - Diameter, measured in meters.

If we know that $\dot V = 0.01\,\frac{m^{3}}{s}$ and $D = 0.05\,m$ , then the flow velocity is:

$v = \frac{4\cdot \left(0.01\,\frac{m^{3}}{s} \right)}{\pi\cdot (0.05\,m)^{2}}$

$v \approx 5.093\,\frac{m}{s}$

The density and dinamic viscosity of the glycerin at 20 ºC are $\rho = 1260\,\frac{kg}{m^{3}}$ and $\mu = 1.5\,\frac{kg}{m\cdot s}$ , then the Reynolds number ( $Re$ ), dimensionless, which is used to define the flow regime of the fluid, is used:

$Re = \frac{\rho\cdot v \cdot D}{\mu}$ (2)

If we know that $\rho = 1260\,\frac{kg}{m^{3}}$ , $\mu = 1.519\,\frac{kg}{m\cdot s}$ , $v \approx 5.093\,\frac{m}{s}$ and $D = 0.05\,m$ , then the Reynolds number is:

$Re = \frac{\left(1260\,\frac{kg}{m^{3}} \right)\cdot \left(5.093\,\frac{m}{s} \right)\cdot (0.05\,m)}{1.519 \frac{kg}{m\cdot s} }$

$Re = 211.230$

A pipeline is in turbulent flow when $Re > 4000$ , otherwise it is in laminar flow. Given that flow has a laminar regime, the friction factor ( $f$ ), dimensionless, is determined by the following expression:

$f = \frac{64}{Re}$

If we get that $Re = 211.230$ , then the friction factor is:

$f = \frac{64}{211.230}$

$f = 0.303$

The friction factor is 0.303.

4 0

3 years ago

A person is interested in becoming an electrician. What are some appropriate types of preparation that this individual can consi

Alchen [17]

Answer:

Four-year college degree I think

3 0

3 years ago

Read 2 more answers

28. What is the value of a resistor in a series circuit if you measure 0.5 amps flowing through it and 15 volts

Anna35 [415]

The girls name on my phone I am in my name is

7 0

3 years ago

This problem has been solved!

lisov135 [29]

Answer: a) 135642 b) 146253

Explanation:

1- the bankers algorithm tests for safety by simulating the allocation for predetermined maximum possible amounts of all resources, as stated this has the greatest degree of concurrency.

3- reserving all resources in advance helps would happen most likely if the algorithm has been used.

5- Resource ordering comes first before detection of any deadlock

6- Thread action would be rolled back much easily of Resource ordering precedes.

4- restart thread and release all resources if thread needs to wait, this should surely happen before killing the thread

2- only option practicable after thread has been killed.

Bii) ; No. Even if deadlock happens rapidly, the safest sequence have been decided already.

5 0

3 years ago

When block C is in position xC = 0.8 m, its speed is 1.5 m/s to the right. Find the velocity of block A at this instant. Note th

Amanda [17]

Answer:

The answer is "2 m/s".

Explanation:

The triangle from of the right angle:

$\to (x_c-0.8)+(1.5+y_4) +\sqrt{x_c^2 + 1.5^2}= constant$

Differentiating the above equation:

$\to V_c +V_A+ \frac{X_cV_c}{\sqrt{x_c^2 +1}}=0\\\\\to 1-V_A+ \frac{0.8 \times 1.5}{\sqrt{ 0.8^2+1.5}}=0\\\\$

$\to V_A= \frac{1.2}{\sqrt{ 0.64+1.5}}+1\\\\$

$= \frac{1.2}{ 1.46}+1\\\\= \frac{1.2+ 1.46}{ 1.46}\\\\ = \frac{2.66}{1.46}\\\\= 1.82 \ \frac{m}{s}\\\\= 2 \ \frac{m}{s}$

3 0

3 years ago