Answer:
D.
Explanation:
In automated welding, defined as “welding with equipment that requires only occasional or no observation of the weld, and no manual adjustment of the equipment controls,” the welder's involvement is limited to activating the machine to initiate the welding cycle and observing the weld on an intermittent basis.
Answer:
Given Data:
concentration of sewer Csewer = 1.2 g/L
converting into mg/L = Csewer = 1.2 g/L x 1000 mg/g = 1200 mg/L
flow rate of sewer Qsewer = 2000 L/min
concentration of sewer Cstream = 20 mg/L
flow rate of sewer Qstream = 2m3/s
converting Q into L/min = 2m3/s x 1000 x 60 = 120000 L/min
mass diagram is
Answer:
The correct/closest option is b
Explanation:
Restriction enzymes are enzymes (endonucleases) that cut short DNA strands at specific sites. Hence, each restriction enzyme has it's own specific site (between two bases) it cuts at. There are two types of end that can be produced by this cut; the blunt end and the sticky end.
A restriction enzyme recognizes (palindromic sequence) and cut in it's own specific end.
For example, if a restriction enzyme cuts between a guanine (G) and an adenine (A), and it cuts a palindromic double stranded DNA in the manner below, it produces a sticky end.
G║AATTC
CTTAA║G
And if a restriction enzyme cuts between guanine (G) and cytosine (C) in the manner below, it produces a blunt end.
GGG║CCC
CCC║GGG
Hence, from the question, restriction enzymes (although chosen by the scientist based on desired sequence to be cut) recognize the sticky or blunt ends itself.
Answer:
It will be equivalent to 338.95 N-m
Explanation:
We have to convert 250 lb-ft to N-m
We know that 1 lb = 4.45 N
So foe converting from lb to N we have to multiply with 4.45
So 250 lb = 250×4.45 =125 N
And we know that 1 feet = 0.3048 meter
Now we have to convert 250 lb-ft to N-m
So 
So 250 lb-ft = 338.95 N-m