There are many types of density dependent limiting factors<span> such as:
1) Availability of food
2) Predation
3) Disease
4) Migration.
You should ask it in "Biology" instead of "Physics". Hope this helps!</span>
Answer:
The geosphere consists of the solid Earth and the atmosphere consists of the gaseous components in the air. Thus, the answer is C.
Explanation:
Answer: Atoms consist of 3 particles: protons, electrons, and neutrons. The nucleus of the atom contains the protons and neutrons. The outer regions contain the electrons
Explanation:
Answer:
1. 1800 W
2. $ 17.3
Explanation:
From the question given above, the following data were obtained:
Current (I) = 15 A
Voltage (V) = 120 V
Time (t) = 20 h per day
Duration = 31 days
Cost = 15.5 cents per kWh
1. Determination of the power.
Current (I) = 15 A
Voltage (V) = 120 V
Power (P) =?
P = IV
P = 15 × 120
P = 1800 W
Thus, 1800 W of power is required.
2. Determination of the cost per month (31 days).
We'll begin by converting 1800 W to KW.
1000 W = 1 KW
Therefore,
1800 W = 1800 W × 1 KW / 1000 W
1800 W = 1.8 KW
Next, we shall determine the energy consumption for 31 days. This can be obtained as follow:
Power (P) = 1.8 KW
Time (t) = 2 h per day
Time (t) for 31 days = 2 × 31 = 62 h
Energy (E) =?
E = Pt
E = 1.8 × 62
E = 111.6 KWh
Finally, we shall determine the cost of consumption. This can be obtained as follow:
1 KWh = 15.5 cents
Therefore,
111.6 KWh = 111.6 KWh × 15.5 cents / 1 KWh
111.6 KWh = 1729.8 cents
Converting 1729.8 cents to dollar, we have:
100 cents = $ 1
Therefore,
1729.8 cents = 1729.8 cents × $ 1 / 100 cents
1729.8 cents = $ 17.3
Thus, it will cost $ 17.3 per month to run the electric heater.
According to I.S. standards, the maximum deflection should typically not be greater than 1/325 of the span.
<h3>
What is Beam deflection?</h3>
A beam is a long segment of a body that can support a weight while defying bending. Beam deflection is the term for the movement of a beam when a force is applied to it in a certain direction.
The beam has the ability to be bent or shifted from its initial position. The deflection is represented by this distance along each member point.
The amount of displacement that a certain structural member may experience with the aid of a sizable amount of load is known as deflection. It may also be known as the angle or the separation. The slope of the deflected form of the body under a load directly influences the distance of deflection of a member under that force.
To know more about Beam deflection:
brainly.com/question/15741463
#SPJ4
