Answer:
When an instruction is sent to the CPU in a binary pattern, how does the CPU know what instruction the pattern means
Explanation:
When the CPU executes the instructions, it interprets the opcode part of the instruction into individual microprograms, containing their microcode equivalents. Just so you know, a full assembly instruction consists of an opcode and any applicable data that goes with it, if required (register names, memory addresses).
The assembly instructions are assembled (turned into their binary equivalent 0s and 1s, or from now on, logic signals). These logic signals are in-turn interpreted by the CPU, and turned into more low-level logic signals which direct the flow of the CPU to execute the particular instruction.
It is called Ram in another term for memory :)
Answer:
don't overuse special effects, match special effects to content, use consistent transitions for each slide
Explanation:
I found this on quizlet.
<span>Step 1Determine what type of connection you need for your computer and printer. If you see a large rectangular connection on your printer it is a parallel printer, and you will need to make sure you have a parallel port on your computer. This connection will be long and rectangular, and it may be red in color. If your Canon printer has a small square connection on the back it is a USB printer, and you will need to look for a flat slot on your computer to hook it up.Step 2Connect the printer and computer. If you are working with a parallel printer connect the large end of the cable to the back of the printer and the smaller end to the computer. If you have a USB printer, connect the square end of the cable to the back of the printer and the flat end to a free USB port on your computer.Step 3Turn on your printer and the computer. Insert the print cartridges that come with the printer. Watch the lower right-hand corner of your computer screen for a "found new hardware" message. This is your indication that the operating system has found your new printer and is installing the proper driver for it.Step 4Insert the CD that comes with your printer, if you are prompted to do so. If your operating system was unable to find a suitable driver it will prompt you for the CD. Keep your CD handy anyway, because you will need it to install the printer utilities.Step 5Insert the CD and allow it to install your printer utilities. After the utilities are installed you will be prompted to clean and align the print heads on your new printer. After the print heads have been aligned your new Canon printer will be ready for use.hope this helps</span>
Answer:
system software is the set of computer programs that controls and manage the operations of computer hardware.
