Answer:
Mechanical engineer? Thats my guess I didnt have alot of options sorry if I am wrong
Explanation:
Explanation:
Conduction:
Heat transfer in the conduction occurs due to movement of molecule or we can say that due to movement of electrons in the two end of same the body. Generally, phenomenon of conduction happens in the case of solid . In conduction heat transfer takes places due to direct contact of two bodies.
Convection:
In convection heat transfer of fluid takes place due to density difference .In simple words we can say that heat transfer occur due to motion of fluid.
Answer:
A RCRA characteristic hazardous waste is a solid waste that exhibits at least one of four characteristics defined in 40 CFR Part 261 subpart C — ignitability (D001), corrosivity (D002), reactivity (D003), and toxicity (D004 - D043). combustible, or have a flash point less than 60 °C (140 °F).
Answer:
t=5.5 mm
Heat dissipation per unit length = 90.477 W/m
Explanation:
Given that
Diameter d = 5 mm ⇒r = 2.5 mm
Conductivity of insulated material K = 0.16 W/mK
Heat transfer coefficient = 20
When thickness reaches up to critical radius of insulation then heat dissipation will be maximum
We know that critical radius of insulation of wire is given as follow
Now by putting the values
So the thickness of insulation
t=8-2.5 mm
t=5.5 mm
As we know that heat transfer due to convection given as follows
Q = hAΔ T
Q=20 x 2 x π x 0.008 x (120-30)
Q = 90.477 W/m
So heat dissipation per unit length = 90.477 W/m
Ordinary Portland Cement (OPC)
Portland Pozzolana Cement (PPC)
Rapid Hardening Cement.
Extra Rapid Hardening Cement
Low Heat Cement.
Sulfates Resisting Cement.