Maximum shear stress in the pole is 0.
<u>Explanation:</u>
Given-
Outer diameter = 127 mm
Outer radius, = 127/2 = 63.5 mm
Inner diameter = 115 mm
Inner radius, = 115/2 = 57.5 mm
Force, q = 0
Maximum shear stress, τmax = ?
τmax
If force, q is 0 then τmax is also equal to 0.
Therefore, maximum shear stress in the pole is 0.
Answer:
1 quart (0.9 liters).
Explanation:
A proper inspection of various systems and components in a vehicle at regular intervals is very important and necessary because it helps to ensure that the vehicle is in a safe and reliable condition.
Generally, these inspection includes tyres, lighting systems, fan belts, shock absorbers, fluid (oil and water) level, etc. If any fault or concern is detected in the course of an inspection, it should be noted for quick repair or servicing by an expert technician.
All automobile engine requires an adequate amount of engine oil as a lubricant so as to mitigate friction and enhance proper functionality of the vehicle. Thus, the proper functionality of an engine is largely dependent on the level of the engine oil; it shouldn't be too low or high.
Basically, the engine oil should be checked at regular intervals (periodically) and should be on the level indicated or chosen by the manufacturer of the vehicle.
A dipstick is designed to be used for checking the engine oil level in a vehicle and it is marked with lines indicating minimum and maximum, low and high or add and full.
The difference in quantity between the add and full marks on an engine oil dipstick is typically 1 quart (0.9 liters).
Answer:
The correct answer is option C. pneumatic power transfer
Explanation:
Pneumatic power transfer is mostly used in food processing industry. The reason is because this pneumatic system usually consists of just air in the form of gas, which means that they will not face any poisonous leakages in the food production houses.
These systems rely heavily on the constant supply of compressed air which is then used to transmit and control the energy.
Answer:
by getting a house permit or build permit.
Explanation:
Answer:
Simple G Code Example Mill - This is a very simple G code example for beginner level ... Run the program on your cnc machine (Safety first, keep a professional around). ... This G code program example don't use Tool radius compensation ...
Explanation: