In my opinion, after marriage. And during the time you're married, be sure you are going to stay with that person a long time because divorces can cause mental health issues towards the child. And if your loved one is abusive, an alcoholic, etc. then you should get out that relationship immediately before having children. Therefore, your children will have a happy, healthy, life.
Answer:
9 bits
Explanation:
We all recognize 1 K bytes as =1024 bytes.
And the storage medium used for program instructions are the non-volatile flash memories. The MCUs are always 8 bits, and a piece of the instructions revenues two or one 16-bit words. Besides we know program memory magnitude through the device name, and as an instance, the ATmega64x line emanates with 64KB of flash, and the ATmega32x line emanates with 32 KB. And there is nobody like off-chip program memory, and all of the codes that are being implemented by the AVR essentially be on the on-chip flash. However, this restraint is not ever applied to the AT94 FPSLIC AVR/FPGA chips. Also, you must know that AVR is a family of microcontrollers established by ATEL in 1996. It is a Harvard architecture type single-chip 8-bit RISC microcontroller. And it is supposed to be the first microcontroller which applied flash memory for storing the program They are heavily used in embedded systems.
1k byte = 1024 bytes, However, if the program instruction takes 16 bits.
And hence it only wishes 512.
Here and now 512 = 10^9, and henceforth you necessitate 9 bits at minimum.
excluding you can somehow paginate that (such as through one-bit pagination, you will be necessitating only 8 bits and so on.)
Therefore the answer here = 9 bits.
Answer:
The answer is "Option c"
Explanation:
Plug and Play is a general term that is used to define gadgets operating with a computer network while connected to it. This technology allows the hardware to use automatically by adding it, and other option can be described as follows:
- In option a, This technology is used in monitoring the commercial vehicles system, which is why it's incorrect.
- In option b, It is wrong because It is used in Microsoft Windows, which increases the physical security.
- In option d, It describes the details about the hardware and switches to configure the device, that's why it is incorrect.
Answer:
D
Explanation:
I don't know the language, but it is clear what is going on.
It looks like you are defining a value for a in both commands.
a.multiply(b); looks like you take the value in a (which is 10) multiply it by 25 and put the result back in a. So so far we have 10 * 25 = 250
Note the next command
a.add(b)
looks like you take the current value in a(which is now 250)
and put the value of b (which has not been changed. It is still 25) and put that in a (which is 250).
The result is 250 + 25 = 275
The answer is D. Since I only understand the logic, if this answer is wrong, I wish you'd leave a note.
This is too much to understand what you need the answer too. In my opinion I can’t answer this question
