All categories

3 years ago

What is building and maintaining

Engineering

1 answer:

Katarina [22]3 years ago

7 0

All tasks needing to eqyal amount

You might be interested in

5. (5 points) Select ALL statements that are TRUE A. For flows over a flat plate, in the laminar region, the heat transfer coeff

finlep [7]

Answer:

The following statements are true:

A. For flows over a flat plate, in the laminar region, the heat transfer coefficient is decreasing in the flow direction

C. For flows over a flat plate, the transition from laminar to turbulence flow only happens for rough surface

E. In general, turbulence flows have a larger heat transfer coefficient compared to laminar flows 6.

Select ALL statements that are TRUE

B. In the hydrodynamic fully developed region, the mean velocity of the flow becomes constant

D. For internal flows, if Pr>1, the flows become hydrodynamically fully developed before becoming thermally fully developed

Explanation:

7 0

3 years ago

When subject to an unknown torque, the shear stress in a 2 mm thick rectangular tube of dimension 100 mm x 200 mm was found to b

laila [671]

Answer:

The shear stress will be 80 MPa

Explanation:

Here we have;

τ = (T·r)/J

For rectangular tube, we have;

Average shear stress given as follows;

Where;

$\tau_{ave} = \frac{T}{2tA_{m}}$

$A_m$ = 100 mm × 200 mm = 20000 mm² = 0.02 m²

t = Thickness of the shaft in question = 2 mm = 0.002 m

T = Applied torque

Therefore, 50 MPa = T/(2×0.002×0.02)

T = 50 MPa × 0.00008 m³ = 4000 N·m

Where the dimension is 50 mm × 250 mm, which is 0.05 m × 0.25 m

Therefore, $A_m$ = 0.05 m × 0.25 m = 0.0125 m².

Therefore, from the following average shear stress formula, we have;

$\tau_{ave} = \frac{T}{2tA_{m}}$

Plugging in then values, gives;

$\tau_{ave} = \frac{4000}{2\times 0.002 \times 0.0125} = 80,000,000 Pa$

The shear stress will be 80,000,000 Pa or 80 MPa.

7 0

3 years ago

3.94 x 105) + (2.04 x 105)

Flura [38]

627.9 is the answer

6 0

3 years ago

The homogeneous, reversible, exothermic, liquid phase reaction: A근R Is being carried out in a reactor system consisting of an id

baherus [9]

Answer:

attached below

Explanation:

3 0

3 years ago

Oil of density 780 kg/m3 is flowing at a velocity of 20 m/s at the atmospheric pressure in a horizontal cylindrical tube elevate

Soloha48 [4]

Answer:

radius = 0.045 m

Explanation:

Given data:

density of oil = 780 kg/m^3

velocity = 20 m/s

height = 25 m

Total energy is = 57.5 kW

we have now

E = kinetic energy+ potential energy + flow work

$E = \dot m ( \frac{v^2}{2] + zg + p\nu)$

$E = \dot m( \frac{v^2}{2] + zg + p_{atm} \frac{1}{\rho})$

$57.5 \times 10^3 = \dot m ( \frac{20^2}{2} + 25 \times 9.81 + 101325 \frac{1}{780})$

solving for flow rate

$\dot m = 99.977we know that [tex]\dot m = \rho AV$

$\dot m = 780 \frac{\pi}{4} D^2\times 16$

solving for d

$99.97 = 780 \times \frac{\pi}{4} D^2\times 16$

d = 0.090 m

so radius = 0.045 m

3 0

4 years ago

What is building and maintaining​

What is building and maintaining