Answer:
t = 5.27 years
Explanation:
First of all, the formula for corrosion penetration rate is given as;
CPR = (KW)/(ρAt)
Where;
K = Constant dependent on exposed area A.
W - weight lost after time
t- time
ρ - density
A - exposed area
From the question;
W = 7.6kg or 7.6 x 10^(6) mg
CPR = 4 mm/yr
ρ = 4.5 g/cm³
Area = 800 cm²
K is a constant of 87.6cm
Making t the subject of the formula from the CPR equation, we obtain;
t = KW/(ρA(CPR))
t = (87.6 x 7.6 x 10^(6))/(4.5 x 800 x 4) = 46233.3 hours
The question wants the time in years.
So let's convert;
There are 8760 hours in a year.
Thus;
t = 46233.3/8760 = 5.27 years.
Answer:
D
Explanation:
Both the joule and the kelvin represent heat. Kelvin is a unit of measurement for temperature and joule is more heat energy.
Answer:
One difference between a real and a roller coaster is that a roller coaster has no engine and a train does.
Explanation:
Given Information:
Initial temperature of aluminum block = 26.5°C
Heat flux = 4000 w/m²
Time = 2112 seconds
Time = 30 minutes = 30*60 = 1800 seconds
Required Information:
Rise in surface temperature = ?
Answer:
Rise in surface temperature = 8.6 °C after 2112 seconds
Rise in surface temperature = 8 °C after 30 minutes
Explanation:
The surface temperature of the aluminum block is given by
Where q is the heat flux supplied to aluminum block, k is the conductivity of pure aluminum and α is the diffusivity of pure aluminum.
After t = 2112 sec:
The rise in the surface temperature is
Rise = 35.1 - 26.5 = 8.6 °C
Therefore, the surface temperature of the block will rise by 8.6 °C after 2112 seconds.
After t = 30 mins:
The rise in the surface temperature is
Rise = 34.5 - 26.5 = 8 °C
Therefore, the surface temperature of the block will rise by 8 °C after 30 minutes.
If it is. DC, direct current reverse the polarity of power leads on the motor.
If it is a 3 phase ac alternating current, reverse any of the two of three leads.
Disconnect power before attempting.