For 2 draw the molucules very close together. because in soilds the molucules are VERY close to gether.
and for 3 Draw them with a lot of space apart from each other. Molucules move freely and openly in air and space.
Hope this helps! Please mark as brainliest! Thanks!! :D
Well, first of all, there's no such thing as "fully charged" for a capacitor.
A capacitor has a "maximum working voltage", because of mechanical
or chemical reasons, just like a car has a maximum safe speed. But
anywhere below that, cars and capacitors do their jobs just fine, without
any risk of failing.
So we have a capacitor that has some charge on it, and therefore some
voltage across it. From the list of choices above . . .
<span>-- Both plates have the same amount of charge.
Yes. And both plates have opposite TYPES of charge.
One plate is loaded with electrons and is negatively charged.
The other plate is missing electrons and is positively charged.
-- There is a potential difference between the plates.
Yes. That's the "voltage" mentioned earlier.
It's a measure of how badly the extra electrons want to jump
from the negative plate to the positive plate.
-- Electric potential energy is stored.
Yes. It's the energy that had to be put into the capacitor
to move electrons away from one plate and cram them
onto the other plate.
</span>
Answer:
Solenoid's inductance is 1.11 × 10^-8H
The average emf around the solenoid is 1.3 × 10^-5V
Explanation: Please see the attachments below
Answer:
Explanation:
Given a parallel plate capacitor of
Area=A
Distance apart =d
Potential difference, =V
If the distance is reduce to d/2
What is p.d
We know that
Q=CV
Then,
V=Q/C
Then this shows that the voltage is inversely proportional to the capacitance
Therefore,
V∝1/C
So, VC=K
Now, the capacitance of a parallel plate capacitor is given as
C= εA/d
When the distance apart is d
Then,
C1=εA/d
When the distance is half d/2
C2= εA/(d/2)
C2= 2εA/d
Then, applying
VC=K
V1 is voltage of the full capacitor V1=V
V2 is the required voltage let say V'
Then,
V1C1=V2C2
V × εA/d=V' × 2εA/d
VεA/d = 2V'εA/d
Then the εA/d cancels on both sides and remains
V=2V'
Then, V'=V/2
The potential difference is half when the distance between the parallel plate capacitor was reduce to d/2
40 dB is 20 dB more power than 20 dB is. 20 dB more means 100 times as much.
