Answer:
I dont really know, I am sorry, but I am going to ask my teacher
Batter boards (or battre boards, Sometimes mispronounced as "battle boads") are temporary frames, set beyond the corners of a planned foundation at precise elevations. These batter boards are then used to hold layout lines (construction twine) to indicate the limits (edges and corners) of the foundation.
Answer:
The material with the higher specific heat capacity would cause a more severe burn.
Explanation:
Quantity of heat (Q) = mass of material (m) × specific heat capacity (C) × temperature difference (∆T)
From the formula above, the relationship between Q and C is direct in which increase in one quantity (C) leads to a corresponding increase in the other quantity (Q)
The material with the higher specific heat capacity would produce more heat, thus cause a more severe burn.
Answer:
B.197 gpm and 12.4 L/s
Explanation:
Given that
Load Q = 404.5 KW
Water inlet temperature= 6.1 °C
Water outlet temperature= 13.9°C
We know that specific heat for water
Now from energy balance
by putting the values
(1 Kg/s = 15.85 gal/min)
We can say that
We know that
12.38=1000 x volume flow rate
So
volume flow rate = 12.38 L/s
So the option B is correct.
Answer:
metal
Explanation:
A yoke assembly are use in an assembly of a rack and pinion steering gear for a vehicle. The spring loaded yokes guided with a rack are made up of metals. It consists of a spring made of steel which pushes the back side of the rack to reduce the play that occurs between the pinion and the rack and still allow the relative motion.
