Answer:
C. Technician B
Explanation:
Excessive Galvanic activity:
To check for excessive galvanic activity, voltmeter is used to check the coolant. If the voltmeter is giving a reading greater than 0.5 V, there is excessive galvanic activity. Excessive galvanic activity is solved by flushing the coolant fluid from engine and refiling it.
Electrolysis problem:
When the system is not properly ground, the cooling system accepts stray current and the coolant becomes an electrolyte which might eat up the radiator. To test for excessive electrolysis, start the engine and turn on all electrical accessories, if the reading is more than 0.5 V, there is electrolysis problem. Ground wires and connections should be checked at this point to stop stray current.
In our case, the first reading is 0.2 V(engine turned off) which is normal and there is no excessive galvanic activity. This means that Technician A is not correct. The second reading is 0.8 V when the engine and all electrical accessories are turned on. This reading is greater than 0.5 V which means there is an electrolysis problem. This means that Technician B is correct and ground wires and connections should be inspected and repaired.
I think the correct answer from the choices listed above is option B. The question that the group of students came up with would be an extremely difficult question to answer scientifically because how people see or experience color is subjective and people might see it differently.
Answer:
The lunar phase or Moon phase is the shape of the directly sunlit portion of the Moon as viewed from Earth. The lunar phases gradually change over the period of a synodic month (about 29.53 days), as the orbital positions of the Moon around Earth and of Earth around the Sun shift.
The Moon's rotation is tidally locked by Earth's gravity; therefore, most of the same lunar side always faces Earth. This near side is variously sunlit, depending on the position of the Moon in its orbit. Thus, the sunlit portion of this face can vary from 0% (at new moon) to 100% (at full moon). The lunar terminator is the boundary between the illuminated and darkened hemispheres.
Each of the four "intermediate" lunar phases (see below) is around 7.4 days, but this varies slightly due to the elliptical shape of the Moon's orbit. Aside from some craters near the lunar poles, such as Shoemaker, all parts of the Moon see around 13.77 days of daylight, followed by 13.77 days of "night". (The side of the Moon facing away from Earth is sometimes called the "dark side of the Moon", although that is a misnomer).
Explanation:
Hope this helps! <3
( This was a picture of a full flower moon in 2019 )
Answer:
10
Explanation:
Subtract the smallest number from the biggest.
Answer:
tensional force
Explanation:
It usually exist in fluid or any liquid substance where by an object is put before it
e.g An ant can walk on water without submersed in it.