Light waves can interact with matter by being transmitted, absorbed, or ____؟
2 answers:
You might be interested in
Here
- Acceleration and initial velocities are constant.
According to first equation of kinematics.
- Time was t at velocity v
- Time will be 4t at velocity 4v
The thermal expansion of the materials allows to find the deflection of the bimetallist strip is Δy = 3.48 cm
given paramers
* Bimetallic brass / steel tape
* Initial temperature, room temperature T = 20ºC
* Final temperature, boiling water = 100ºC
* initial length L₀ = 222mm (1cm / 10mm) = 22.2cm
* thickness of bimetallic tape e = 0.036 inch (2.54 cm/1 inch) = 0.0914 cm
to find
* perpendicular deviation or deflection (Δy)
Thermal expansion is the phenomenon of change in the length of a body due to the change in temperature, due to the increase in the length of the atomic and molecular bonds, macroscopically it is described by
ΔL = α L₀ ΔT
ΔL and ΔT are the variation of the length and temperature respectively, L₀ is the initial length and α the coefficient of expansion ends.
In this case we have a strip formed by two materials with different coefficient of thermal expansion,
Brass α_{brass} = 19 10⁻⁶ ºC⁻¹
Steel α_{steel} = 11 10⁻⁶ ºC⁻¹
In the attached we can see a diagram of the process, as the temperature increases, the material with greater thermal expansion lengthens more, so the system must curve towards the center of the material with less
thermal expansion. Let's find the length of the strip for each material
brass L_{f brass} - L₀ = α_{brass} L₀ ΔT
Steel L_{f steel} - L₀ = \alpha_{steel} L₀ ΔT
Note that the initial length is the same for the two materials and that the strip is in thermal equilibrium at room temperature.
If we assume that we have an arc of circumference, we can write the length of the arc
θ = L / r
where θ is the angle in radines, L the length of the arc and r the radius of curvature, let's write this equation for each material
brass L_{f \ brass} =θ r₁
steel L_{f \ steel} = θ r₂
we substitute in our equations
θ r₁ - L₀ = α_{brass} L₀ ΔT
θ r₂ - L₀ = α_{steel} L₀ ΔT
let's subtract the two equations
θ (r₁- r₂) = L₀ ΔT (α_{brass} - α_{steel})
the thickness of the strip is
e = r₁ -r₂
θ =
we calculate
θ =
θ = 0.155 rad
Let's use trigonometry to find the perpendicular deflection
tan θ = Δy / L₀
Δy = L₀ tan θ
Δy = 22.2 tan 0.155
Δy = 3.48 cm
Using the thematic expansion of the two materials we find the deflection of the bimetallist strip is 3.38 cm
Learn more about thermal expansion here: brainly.com/question/18717902
