Answer:
True Position using features of size (MMC/LMC)
Explanation:
True Position using features of size (MMC/LMC)
However, with true position you can make the tolerance referenced to several datum's as opposed to just one with axis perpendicularity. When you callout true position using datums on the face, and sides of the part – perpendicularity is controlled as well.
Surface: Perpendicularity is measured using a height gauge, similar to flatness, however, the gauge (or part) is locked to a 90° datum to measure how perpendicular the surface is. The entire surface has to be measured if it is a flat feature.
If the tolerance is preceded by a diameter symbol (⌀), the tolerance is a diameter or cylindrical shaped zone, as in the position of a hole. If there is no symbol preceding the tolerance, the default tolerance zone shape is parallel planes or a total wide zone, as in the position of a slot or profile of a surface.
Oh that’s a question you can just look up on safari the right answer is there thank me later tho
Answer: 0.025 in = 0.065 mm
Explanation: To convert the value in inches to mm we have to multiply the inches by the conversion factor 25.4.
So, 0.025 × 25.4 = 0.065 mm (millimeter)
Conversion formula for calculation in (inch) into mm is:
Value in mm = Value in in × 25.4
- One inch is equal to the 25.4 mm.
Answer:
A
Explanation: A rarefaction is a region in a longitudinal wave where the particles are furthest apart.