Answer:
All of the above
Explanation:
firstly, a creep can be explained as the gradual deformation of a material over a time period. This occurs at a fixed load with the temperature the same or more than the recrystallization temperature.
Once the material gets loaded, the instantaneous creep would start off and it is close to electric strain. in the primary creep area, the rate of the strain falls as the material hardens. in the secondary area, a balance between the hardening and recrystallization occurs. The material would get to be fractured hen recrstallization happens. As temperature is raised the recrystallization gets to be more.
“How old are the legos” 89 years old.
“Who created them?” Ole Kirk Christiansen.
“Why did they created them?” As a you man, Christiansen turned his love of whittling and playing with wood into a Business and, in 1916, he opened his own shop. Since times were so hard, Christiansen made the hard decision to use his wood to create inexpensive goods that might actually sell. Among them were Cheap toys.
Hope this helps•
Bye~
•Kate•
Answer:
Architectural plans.
Explanation:
An architectural plan is called the drawings made by architects, civil engineers or designers of spaces or interiors, in which these professionals capture their building projects, organizing the distribution of the spaces to be used, the elements to be located in them and, fundamentally, to give construction planning a projection into reality. Thus, the plans help professionals to have a better understanding of the expected end result of the projects they are carrying out.
Answer:
A phrase from: who loves life
Explanation:
Answer:
The percentage ductility is 35.5%.
Explanation:
Ductility is the ability of being deform under applied load. Ductility can measure by percentage elongation and percentage reduction in area. Here, percentage reduction in area method is taken to measure the ductility.
Step1
Given:
Diameter of shaft is 10.2 mm.
Final area of the shaft is 52.7 mm².
Calculation:
Step2
Initial area is calculated as follows:
A = 81.713 mm².
Step3
Percentage ductility is calculated as follows:
D = 35.5%.
Thus, the percentage ductility is 35.5%.
