Answer:
Final length of the rod = 13.90 in
Explanation:
Cross Sectional Area of the polythene rod, A = 0.04 in²
Original length of the polythene rod, l = 10 inches
Tensile modulus for the polymer, E = 25,000 psi
Viscosity, 
Weight = 358 lbs - f
time, t = 1 hr = 3600 sec
Stress is given by:
Based on Maxwell's equation, the strain is given by:
Strain = Extension/(original Length)
0.39022 = Extension/10
Extension = 0.39022 * 10
Extension = 3.9022 in
Extension = Final length - Original length
3.9022 = Final length - 10
Final length = 10 + 3.9022
Final length = 13.9022 in
Final length = 13.90 in
Answer:
Information such as tolerance and scale can be found in the <u>title block</u> of an engineering drawing
Explanation:
The title block of an engineering drawing can normally be found on the lower right and corner of an engineering drawing and it carries the information that are used to specify details that are specific the drawing including, the name of the project, the name of the designer, the name of the client, the sheet number, the drawing tolerance, the scale, the issue date, and other relevant information, required to link the drawing with the actual structure or item
Answer:
a). TRUE
Explanation:
Thermal efficiency of a system is the defined as the ratio of the net work done to the total heat input to the system. It is a dimensionless quantity.
Mathematically, thermal efficiency is
η = net work done / heat input
While heat rate is the reciprocal of efficiency. It is defined as the ratio of heat supplied to the system to the useful work done.
Mathematically, heat rate is
Heat rate = heat input / net work done
Thus from above we can see that heat rate is the reciprocal of thermal efficiency.
Thus, Heat rate is reciprocal of thermal efficiency.
Answer:
Do you need shown work for all of this?
