A handsfree device may be used if it can be activated or deactivate with a cellphone.
<h3>What is hands-free?</h3>
Handsfree is a device which when connected to a cell device can be used in listening to audio, video and messages.
A driver can also activate or deactivate with a swipe when connect to the vehicle audio device.
Therefore,
A handsfree device may be used if it can be activated or deactivate with a cellphone.
Learn more on handsfree below
brainly.com/question/12253610
#SPJ1
Answer:
X=0.194
T=-33.6C
Explanation:
Hello!
To solve this problem use the following steps!
1. We will call the expansion valve inlet 1 and exit 2
2.Through laboratory tests, thermodynamic tables were developed, these allow to know all the thermodynamic properties of a substance (entropy, enthalpy, pressure, specific volume, internal energy etc ..)
through prior knowledge of two other properties such as pressure and temperature.
3. Find the enthalpy of state 1 using pressure and temperature using thermodynamic tables
h1=Enthalpy(Ammonia;T=24C;P=1000kPa)=312.9KJ/kg
4. An expansion valve is a device which does not have heat or work exchange which means that the enthalpy of state one is equal to that of state 2, so using thermodynamic tables uses the pressure of state 2 and enthalpy of state 1 to find quality and temperature
x2=Quality(Ammonia;P=100kPa;h=h1=312.9KJ/kg)
=0.194
T2=Temperature(Ammonia;P=100kPa;h=h1=312.9KJ/kg)=-33.6C
Answer:
93.8 sec
Explanation:
it is given that tab has 350 gallon
we know that 1 gallon = 0.134 cubic foot
350 gallon = 350×0.134=46.9 cubic foot
the delivery pressure is 100 psi which is greater than 80 psi to operate machine
it is given that supply volume is 30 cubic foot per minute
= 
![time\ required\= [tex]\frac{46.9}{0.5}](https://tex.z-dn.net/?f=time%5C%20required%5C%3D%20%20%5Btex%5D%5Cfrac%7B46.9%7D%7B0.5%7D)
=93.8 sec
Answer:
print(100/42)
Explanation:
This is the operand for division in python and some other languages.
Answer:
The algorithm is as follows:
1. Declare Arr1 and Arr2
2. Get Input for Arr1 and Arr2
3. Initialize count to 0
4. For i in Arr2
4.1 For j in Arr1:
4.1.1 If i > j Then
4.1.1.1 count = count + 1
4.2 End j loop
4.3 Print count
4.4 count = 0
4.5 End i loop
5. End
Explanation:
This declares both arrays
1. Declare Arr1 and Arr2
This gets input for both arrays
2. Get Input for Arr1 and Arr2
This initializes count to 0
3. Initialize count to 0
This iterates through Arr2
4. For i in Arr2
This iterates through Arr1 (An inner loop)
4.1 For j in Arr1:
This checks if current element is greater than current element in Arr1
4.1.1 If i > j Then
If yes, count is incremented by 1
4.1.1.1 count = count + 1
This ends the inner loop
4.2 End j loop
Print count and set count to 0
<em>4.3 Print count</em>
<em>4.4 count = 0</em>
End the outer loop
4.5 End i loop
End the algorithm
5. End
