Average speed = distance traveled / time
average speed = (126.5 m * 3.5 laps) / (4.17 min)
= 106.2 m/min
Answer:
1.) Micrometres screw gauge
2.) Tape rule.
Explanation:
Given that the diameter and the length of a thin wire, approximately 1m in length, are measured as accurately as possible.
what are the best instruments to use ?
To measure the diameter of a thin wire, the best instrument to use is known as micrometres screw gauge.
And to measure the length of a thin wire up to 1 m, the measuring device can be tape rule or long metre rule.
<span>If you put a magnet right next to a USB drive, depending on the strength of the magnet and the amount of steel, nickel or cobalt used in the construction of that particular model of USB drive, the drive would either adhere to, or not adhere to, the magnet. This would cause no other significant effects. The storage of data in solid state form (as in USB drives) is not magnetic in nature, so no deletion or any other damage of the stored data would occur.</span>
Answer:
201.5537 mph
Explanation:
Given the following data;
Speed = 90.1 m/s
Speed can be defined as distance covered per unit time. Speed is a scalar quantity and as such it has magnitude but no direction.
Mathematically, speed is given by the formula;
Speed = distance/time
To convert this value into miles per hour;
Conversion;
1 meter = 0.000621 mile
90.1 meters = 90.1 * 0.000621 = 0.05595 miles
1 metre per second = 2.237 miles per hour
90.1 meters per seconds = 90.1 * 2.237 = 201.5537 miles per hour
90.1 m/s = 201.5537 mph
