1.8 L
<h3>
Explanation</h3>
The volume of a gas, V, is inversely proportional to the pressure on it, P. That is:
V₁ · T₁ = V₂ · T₂.
Rearranging gives:
V₂ = V₁ · T₁ / T₂ = 4.2 × (101 / 235) = 1.8 L
Answer:
The warmer, lighter air rises, bringing cooler, heavier air to low altitudes.
Air at higher altitudes doesn't have as much air weighing down on it from above.
Explanation:
In short - air pressure is the result of the cumulative force that air molecules act on objects below them due to Earth's gravity. The higher the altitude, the less air molecules there are to act a force below them, and therefore, there's less air pressure at higher altitudes.
Carbon dioxide can’t exist in three states; Gas, Liquid & Solid. At normal temperatures and pressures, CO2 is colorless with a slightly pungent odor at high concentrations. If compressed and cooled to proper temperature the gas liquifies. Solid CO2, (dry ice) sublimates back to the natural gaseous state.
9ml will be given for the case of dosage calculation order: 3 mg available: 2 mg per 6 ml
Conversion factors are necessary for dosage calculation, such as when translating from pounds to kilograms or liters to milliliters. This approach, which is straightforward in design, enables physicians to deal with different units of measurement and convert factors to arrive at the solution.
dosage calculation techniques serve as a second or third check on the accuracy of the previous computation techniques. Dimensional Analysis, Ratio Proportion, and Formula or Desired Over Have Method are the three main approaches for dosage calculation. dosage calculations are frequently prescribed and labeled based on their weight or, for solutions, their strength, which is the amount of weight dissolved or suspended in a given volume.
To learn more about dosage calculation please visit -
brainly.com/question/12720845
#SPJ4
Alloy: alloy, metallic substance composed of two or more elements, as either a compound or a solution. The components of alloys are ordinarily themselves metals, though carbon, a nonmetal, is an essential constituent of steel. ... See also amalgam; ferroalloy; intermetallic compound
Ceramic: A ceramic is any of the various hard, brittle, heat-resistant and corrosion-resistant materials made by shaping and then firing an inorganic, nonmetallic material, such as clay, at a high temperature. Common examples are earthenware, porcelain, and brick.
Synthetic polymer: Synthetic polymers are derived from petroleum oil, and made by scientists and engineers. Examples of synthetic polymers include nylon, polyethylene, polyester, Teflon, and epoxy. ... Vulcanized rubber is a synthetic (man-made) polymer, while pectin is an example of a natural polymer
That’s a *hint*
