What factors upon which work depends

Physics

1 answer:

Fynjy0 [20]3 years ago

7 0

Work depends on the force on the object and the displacement of the object.

You might be interested in

1. Which of the following is an accurate statement? A. Step-down voltage transformers have a different number of turns in the pr

Snowcat [4.5K]

'C' is the only true statement on the list.

Step-up voltage transformers have a lower number of turns
in the primary than in the secondary winding.

4 0

3 years ago

10. Almost three-quarters of household energy use is due to the following:

Arturiano [62]

Answer: Energy consumption and sustainability is important so that it remain available for future generation.

Explanation:

1. The home furnaces are likely to require fuel like coal, which will directly emit carbon dioxide and carbon monoxide gases. These should be replaced with the electrical furnaces. The old or more power consuming air conditioners should be replaced with new ones.

2. The water heaters should be tankless so their capacity to heat more water could be possible. The water heaters should be electricity saving.

3. Washer and dryers should be water savy and electricity savy. A front-loading washing machine is useful energy saver.

4. The LED lights are more electricity saving than conventional bulbs. Halogen lights are also electricity saving.

7 0

4 years ago

A solenoid 25.0 cmcm long and with a cross-sectional area of 0.550 cm^2 contains 460 turns of wire and carries a current of 90.0

ankoles [38]

Answer:

a. B = 0.20T

b. u = 17230.6 J/m³

c. E = 0.236J

d. L = 5.84*10^-5 H

Explanation:

a. In order to calculate the magnetic field in the solenoid you use the following formula:

$B=\frac{\mu_o n i}{L}$ (1)

μo: magnetic permeability of vacuum = 4π*10^-7 T/A

n: turns of the solenoid = 460

L: length of the solenoid = 25.0cm = 0.25m

i: current = 90.0A

You replace the values of the parameters in the equation (1):

$B=\frac{(4\pi*10^{-7}T/A)(460)(90.0A)}{0.25m}=0.20T$

The magnetic field in the solenoid is 0.20T

b. The magnetic permeability of air is approximately equal to the magnetic permeability of vacuum. To calculate the energy density in the solenoid you use:

$u=\frac{B^2}{2\mu_o}=\frac{(0.20T)^2}{2(4\pi*10^{-7}T/A)}=17230.6\frac{J}{m^3}$