What is the area of the giant american flag?

When you look at green dots with a red filter what color did you see?

Dimas [21]

-- Looking at the dots casually, they look green because they absorb all other
colors of light, and only green light is left to proceed to your eyes. (In order for
this to work, there has to be some green in the light shining on the dots.
Daylight and most light bulbs work fine.)

-- The filter looks red because it absorbs all other colors of light, and only
the red light is left to pass through the filter and come out on the other side.

-- When the green light from the dots hits the red filter, it's absorbed in the
filter, and there's no light left to come out on the other side.

If you're looking through the filter at the dots, they look <em>black</em>.

3 0

3 years ago

Arrange the following types of electromagnetic radiation in order of increasing (lowest to highest) frequency from left to right

algol13

Electromagnetic radiation in order of increasing (lowest to highest) frequency is Radio waves < Green visible light < UV radiation.

<h3>What is Frequency?</h3>

This is defined as the rate at which something occurs or is repeated over a particular period of time. The unit of frequency is referred to as Hertz.

Electromagnetic radiations with increasing frequency can be seen below:

Radio waves, microwaves, infrared waves, visible light, ultraviolet radiations, X rays, γ rays.

Read more about Frequency here brainly.com/question/254161

4 0

3 years ago

An object of mass 6 kg. is resting on a horizontal surface. A horizontal force

son4ous [18]

Answer:

a) The work done by the applied force is 1500 joules.

b) The kinetic energy of the block after 10 seconds is 1200 joules.

c) The magnitude of the force of friction is 3 newtons and its direction is against motion.

d) 300 joules of energy are lost during motion.

Explanation:

a) Since the object has a constant mass, on which a constant horizontal force is exerted. The work done by the force ( $W$ ), measured in joules, is defined by the following expression:

$W = F\cdot \Delta x$ (1)

Where:

$F$ - Force, measured in newtons.

$\Delta x$ - Distance, measured in meters.

If we know that $F = 15\,N$ and $\Delta x = 100\,m$ , then the work done by the force exerted on the object is:

$W = (15\,N)\cdot (100\,m)$

$W = 1500\,J$

The work done by the applied force is 1500 joules.

b) At first we need to calculate the net acceleration of the object ( $a$ ), measured in meters per square second. By assuming a constant acceleration, we use the following kinematic formula:

$\Delta x = v_{o}\cdot t +\frac{1}{2}\cdot a\cdot t^{2}$ (2)

Where $v_{o}$ is the initial velocity of the object, measured in meters per second.

We clear the acceleration within the equation above:

$\frac{1}{2}\cdot a \cdot t^{2} = \Delta x-v_{o}\cdot t$

$a = \frac{2\cdot (\Delta x - v_{o}\cdot t)}{t^{2}}$

If we know that $\Delta x = 100\,m$ , $v_{o} = 0\,\frac{m}{s}$ and $t = 10\,s$ , then the net acceleration experimented by the object is:

$a = \frac{2\cdot \left[100\,m-\left(0\,\frac{m}{s} \right)\cdot (10\,s)\right]}{(10\,s)^{2}}$

$a = 2\,\frac{m}{s^{2}}$

By the 2nd Newton's Law, we construct the following equation of equilibrium under the consideration of a friction force acting against the motion of the object:

$\Sigma F = F - f = m\cdot a$ (3)

Where:

$F$ - External force exerted on the object, measured in newtons.

$f$ - Kinetic friction force, measured in newtons.

If we know that $F = 15\,N$ , $m = 6\,kg$ and $a = 2\,\frac{m}{s^{2}}$ , the kinetic friction force is:

$f = F-m\cdot a$

$f = 15\,N-(6\,kg)\cdot \left(2\,\frac{m}{s^{2}} \right)$

$f = 3\,N$

The work done by friction ( $W'$ ), measured in joules, is:

$W' = f\cdot \Delta x$ (4)

$W' = (3\,N) \cdot (100\,m)$

$W' = 300\,J$

And the net work experimented by the object is:

$\Delta W = 1500\,J - 300\,J$

$\Delta W = 1200\,J$

By the Work-Energy Theorem we understand that change in translational kinetic energy ( $\Delta K$ ), measured in joules, is equal to the change in net work. That is: