Answer:
C. Low viscosity for Maine in the winter and high viscosity for Florida in the summer.
Explanation:
The choice of motor oil or engine oil depends on the type of engine and also on the type of climate on which the engine runs.
In winter climates, we should use oil with low viscosity as at lower temperatures, the it flows more readily if its viscosity is low.
But the summer season needs a relatively thicker oil so as to reduce the thinning effect of the oil out of the engine.
Thus for Maine in the winter season, we need a low viscosity oil and for Florida a high viscosity oil in the summer season.
Therefore, option (c) is correct.
Answer:
A rule with tapered end
Explanation:
When measuring the depth of a drilled hole that has a small diameter, you should measure at the outside wall of the hole to get the full depth of the diameter part called full diameter depth measurement. However, a depth micrometer can be used to get the measurement.
Explanation:
1. Circumference is pi times diameter.
C = πd
C = 9π inches
C ≈ 28.3 inches
2. Mechanical advantage is ratio of output force to input force.
MA = Fout / Fin
MA = 155 lb / 15 lb
MA ≈ 10.3
3. Mechanical advantage is ratio of input distance over output distance.
MA = din / dout
MA = 10.5 in / 0.85 in
MA ≈ 12.4
4. Mechanical advantage of pulley system is the number of strands.
MA = 8
5. Mechanical advantage is ratio of output force to input force.
MA = Fout / Fin
8 = Fout / 200 lb
Fout = 1600 lb