Answer:
D. Both pull-in and hold-in windings are energized.
Explanation:
The instant the ignition switch is turned to the start position, "Both pull-in and hold-in windings are energized." This is because the moment the ignition switch is turned to the start position, voltage passes through to the S terminal of the solenoid.
The hold-in winding is attached to the case of the solenoid. Similarly, the pull-in winding is also attached to the starter motor. Thereby, the current will move across both windings by getting energized to generate a strong magnetic field.
Answer:
Could ask a family member to help
Explanation:
Answer:
D Reflection
Explanation:
It reflects the light from the sun. Then when the earth gets in the way, it casts a shadow causing crescent moons.
Answer and Explanation:
Aliasing is a distortion in the signal when a continuous signal is converted into digital signal that is ADC process, due to this effect the signal aliases of one another.There will be no aliasing effect if the frequency of the signal will not be higher than the sampling frequency
The another way of avoiding aliasing is to limit the range of the continuous signal.
Answer:
V(rms) = 98.99 mV ≅ 100 mV
Explanation:
Outputs = -14 to +14
Gain = =100
We know that Gain = Output/Input
so, to find out the input voltage:
Input = Output/Gain
= ±14/-100
Input = 0.14 V
This is the peak input voltage (Vpk) of the sine wave and the question is asking us to find the rms value.
To calculate the rms value:
V(rms) = V(pk)/√2
= 0.14/√2
= 0.09899
= 98.99 mV
V(rms) ≅ 100 mV
